Originally Posted by oceanperf (Post 4289347)

TRS wont work on Chris Cat. Lots of experience with that. I have SSMII's here. Best set up I remember was fours on boxes on drivelines. Chris

Originally Posted by TGC-32 (Post 4283023)

Back in the 1980's when the Chris Cats first came out, they were originally equipped in base spec with TRS drives, and all were replaced at factory expense with Speedy II's. The TRS lowers couldn't handle the loads of surfacing and would basically "spit" the prop shafts due to carrier failures. So, basically I wouldn't go there as I would expect the same results! The Speedy II sits one inch lower, so you will have to raise the X by that much to properly surface the props or you will be giving up a bit of performance. Good luck! I love those old Chris Cats and would like to find one to restore at some point.

Originally Posted by TGC-32 (Post 4293546)

Man, what I wouldn't give to find your old man's Chris Cat! That was the best looking one of all, custom done in similar blue gel-coat to "Black Duck". If I could locate it, I sure would like to buy it and put some BIG power in it! I re-sold it for your dad back in the mid-90's to a guy from New Jersey, but I don't know what happened to it after that.

Originally Posted by TGC-32 (Post 4294688)

All right, if I find it I'll let you buy it. Seems only right for you to have it. You can take me for a ride in it!