Thanks guys, I have 4 brand new ones and was wondering what they are worth.

I made a Lexon windscreen that attaches to original three aluminum flip up screens. You have to use slots in the new screen for the bolts attaching it to the original to allow it to swing up and down. You can run with it up or down - works great. Was thinking about marketing them, but not enough time. The angle and length of attaching slots is critical. If anyone is interested, I'll take a pic and send it along.

Mike- I was preparing to do the same thing...instead of switching to a full windscreen. I would appreciate any more info and maybe some pics.
Thanks-MJB

Mike, Im interested in seeing what you did too. I PM'd you but I didn't get a reply. Thanks

I'll either post some pics in the next couple of days, or send some directly to you

I'll either post some pics in the next couple of days, so send directly to you.

Post some pics....The wifey and daughter want clear ones so they can see what the hell they're doing when driving the boat!

I've got a pics of Lexon Wind Screen up and down and a close-up of out side and center aluminum flap where it's attached. The angle and length of attaching slots are critical for it to go up and down easily. I cut the two outside aluminum flaps down to see over. Left the center one full size for support of W/S. It works great. Most people don't even notice it, which I guess is good. For some reason I can't post pics here. If you want pics, send email to: [email protected] and I'll send them along.