BBC headers - what's the best for the HP/money
02-15-2006 | 02:38 PM
#1
Thread Starter
Registered
Joined: Mar 2005
Posts: 647
Likes: 0
From: Sarasota, FL
BBC headers - what's the best for the HP/money
Just sold my heavy Gill manifolds with elbows - looking for some advise on Stainless header - Don't have the pockets for STELLING and I hear the CMI elbows only work with Merc factory heads (bolt pattern) - I swa a nice set of Hardin Marine two piece - and I also notice the Lightening header are being use by Keith Eickert. This is a big investment and I want to go the right way - Anything used out there? Oh, running 572's with ASM EFI mild to rad roller cam - My builders says around 650 HP
02-15-2006 | 03:10 PM
#3
Registered
Joined: Oct 2000
Posts: 3,161
Likes: 3
From: Darien, CT
Re: BBC headers - what's the best for the HP/money
what kind of heads are you running?
as far as i know, CMI will work on any BBC head...and are probably your best choice.
i had CMI e-tops on my tall deck 540s with steel heads that were in my Cafe. looked great, sounded great, performed great(big improvement over the GILs)
as far as i know, CMI will work on any BBC head...and are probably your best choice.
i had CMI e-tops on my tall deck 540s with steel heads that were in my Cafe. looked great, sounded great, performed great(big improvement over the GILs)
Last edited by Sean; 02-15-2006 at 03:12 PM.
02-15-2006 | 07:38 PM
#4
Registered
Joined: Oct 2004
Posts: 8,390
Likes: 7
From: medellin colombia, pablo escobar's lil town
Re: BBC headers - what's the best for the HP/money
hard to beat the gen III's for price and performance, you can buy a pair for the same price as one set of nice headers.
Thread
Thread Starter
Forum
Replies
Last Post
baronbob
General Q & A
3
09-22-2005 10:44 PM
