That looks fantastic. Only problem is, the hatch on the boat is already the raised blower hatch, so I would have to start from scratch:rolleyes:

This is certainly giving me some ideas!

Corey

Corey, I don't guess your blowers would fit under the new style raised hatch used on the later model Guns? Those are very nice looking units but don't know if they would give you enough room.

where were you last year,i could have used that hatch,,i ended up two trays in mine ,had them glassed in and gelcoat looked good and still flat across the whole sunpad ill try and send a pic

took most of last year to get the plug and mold done, come out pretty good though. Stout piece with a 3/8 Baltek core, post some pics of yours i dont know what you mean by trays? just curious

I don't own a gun yet, trying to talk the wifey into one:evilb:

I was wondering about the later style hatch, but I still think the blowers in a couple of the guns I am looking at create too much height, thus needing scoops. Both boats I am looking at now have the tall blower hatch, and the wifey won't consider it. I can't totally blame her since thats her favorite area on a boat.

Corey

Cp performance used to sell them, I got mine from a local FG shop

went through all that can tell everything you need to know, plus I will sell you my Gun,its got a full pad

The Mirrorplex is held on with a special adhesive, looks like silicone but made to not lift the mirror backing. Daytona Plastics sells it along with the mirrorplex. I like the Hatch Glass Dave made. How much does the Glass Dave Hatch weigh?

slightly (but not by much) less than a factory race hatch but i can lay them up lighter if need be.