New style Cig windshield
08-06-2007 | 02:50 PM
#1
Thread Starter
Registered
Joined: Jul 2006
Posts: 886
Likes: 0
From: Ft. Lauderdale Florida & Tarpon Springs Florida
New style Cig windshield
Got the jig back today to make the new style windshields, approx 75" long x 4 1/2 at the ends that taper up to 6 1/2 in the middle. (3/8" thick) Will have the brackets back from powdercoating at the end of the week, and the small upholstered pad that slides in between the dash and windshield.
Will post pics. Can make them for $850.00 for the complete set. let me know
Will post pics. Can make them for $850.00 for the complete set. let me know
08-07-2007 | 07:34 AM
#2
OSO Moderator
Joined: Oct 2000
Posts: 3,580
Likes: 6
From: Virginia Beach, VA
Interested, but that is same price I've been quoted for complete kit.
Will the w/s be clear or smoked?
Will the w/s be clear or smoked?
__________________
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
Last edited by BillR; 08-07-2007 at 08:07 AM.
08-07-2007 | 08:29 AM
#3
Thread Starter
Registered
Joined: Jul 2006
Posts: 886
Likes: 0
From: Ft. Lauderdale Florida & Tarpon Springs Florida
It can be either smoked or clear. I made the jig for the plexiglass, I am going to talk with the glass guy today to see what his botom line will be to make them. I am hoping to only pay in the 600.00 range for everything. Give me a few days to complete the set up.
I will send you a set when they are done to see if you want it, if you do you pay for it... if you dont , you can just send it back
I will send you a set when they are done to see if you want it, if you do you pay for it... if you dont , you can just send it back
08-07-2007 | 08:43 AM
#4
VIP Member
Joined: Dec 2001
Posts: 10,397
Likes: 402
From: Cape Coral, Florida
It can be either smoked or clear. I made the jig for the plexiglass, I am going to talk with the glass guy today to see what his botom line will be to make them. I am hoping to only pay in the 600.00 range for everything. Give me a few days to complete the set up.
I will send you a set when they are done to see if you want it, if you do you pay for it... if you dont , you can just send it back
I will send you a set when they are done to see if you want it, if you do you pay for it... if you dont , you can just send it back
I'd be interested on seeing how the finished product turns out. Post some pictures when you get it back!!
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
08-07-2007 | 10:04 AM
#5
OSO Moderator
Joined: Oct 2000
Posts: 3,580
Likes: 6
From: Virginia Beach, VA
It can be either smoked or clear. I made the jig for the plexiglass, I am going to talk with the glass guy today to see what his botom line will be to make them. I am hoping to only pay in the 600.00 range for everything. Give me a few days to complete the set up.
I will send you a set when they are done to see if you want it, if you do you pay for it... if you dont , you can just send it back
I will send you a set when they are done to see if you want it, if you do you pay for it... if you dont , you can just send it back
Ok. Maybe I can be your guinea pig and post pix of my installation?
I guess the expensive part is the bent metal bar? The plexi is not expensive.
__________________
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
08-10-2007 | 09:29 AM
#6
FIERCE ALLEGIANCE
Joined: Jun 2003
Posts: 1,207
Likes: 0
From: West palm Beach, FL & SML VA
I paid $100 for a replacement WS, cut down, drilled and sanded. I think it was 1/2" material. I paid, $200 to have my brackets (and a pile of engine parts) power coated. So the aluminum fabrication must me in the $500 range. Probably a bit high.
08-12-2007 | 12:17 AM
#8
10x
Joined: Dec 2003
Posts: 4,796
Likes: 2
From: La Grange Ill
Is this the same w/s that is used on a 46 RR ?? If so, I need one in smoke tint. The one I have, has a crack in the outside mounting hole, where it's screwed down.
__________________
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
Last edited by 10x; 08-19-2007 at 08:32 PM.
08-12-2007 | 09:01 AM
#9
Registered
Joined: Sep 2001
Posts: 3,249
Likes: 2
From: St. Louis
Tanner did your flip ups have the turn latches to keep them in the down possition, what are you going to do with those holes, Does the new windsheild cover up the holes in the deck where the flip ups used to be
08-12-2007 | 02:45 PM
#10
Thread Starter
Registered
Joined: Jul 2006
Posts: 886
Likes: 0
From: Ft. Lauderdale Florida & Tarpon Springs Florida
The new winshield bracket lines up right over the old holes. The holes are already threaded, so it saves alot of time trying to put a nut on them.
I am having the boat painted, so I am just filling in the holes where the lock downs were. I If I wasnt' going to be painting, I would have just put back in some short screws and all you would see is 3 stainless heads flush with the deck.
I am having the boat painted, so I am just filling in the holes where the lock downs were. I If I wasnt' going to be painting, I would have just put back in some short screws and all you would see is 3 stainless heads flush with the deck.
