Cigarette Bullet
#31
Which 88 the first or the second one. Kevin from midwest is a friend of mine and got me into this kind of work. He has had a hand on all of these one time or another.
#32
Don't wanna hijack this thread, but since you're Bullet experts, I'd like to ask a question.
I looked at a Bullet this past weekend at LOTO and it had a crack in the deck right where the right side steps up. Is this a common issue for Bullets? Have you guys experienced this?
Thanks!
I looked at a Bullet this past weekend at LOTO and it had a crack in the deck right where the right side steps up. Is this a common issue for Bullets? Have you guys experienced this?
Thanks!
#33
)without searching for it.454 Mags=63-65 mph
500HP=72-73 mph
550HP=77-78
600HP=82-83
650HP=86-88 mph
700HP and up =Broken drives


__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
#35
Don't wanna hijack this thread, but since you're Bullet experts, I'd like to ask a question.
I looked at a Bullet this past weekend at LOTO and it had a crack in the deck right where the right side steps up. Is this a common issue for Bullets? Have you guys experienced this?
Thanks!
I looked at a Bullet this past weekend at LOTO and it had a crack in the deck right where the right side steps up. Is this a common issue for Bullets? Have you guys experienced this?
Thanks!
#36
Very common on bullets they crack usally up by the helm and at the vents by the gas lids also. Most bullets you see redone have been fixed put them back in big water sooner or later they are coming back. Every boat has a weak point somewhere something has to give some are just in covered areas and some are not.
#37
Thread Starter
Platinum Member
Joined: Sep 2007
Posts: 1,676
Likes: 36
From: Millsboro, DE- Cape Coral, FL
I really like Clays Bullet, I am still trying to get pics of the Bullet for sale on Boat trader, the one with the tribal graphics, and I love the ones Carter has for sale, just want my Donzi to sell, I dont want to own 2 boat in this market, any other out there for sale?
www.WMFwatercraft.com
www.WMFwatercraft.net
www.WMFwatercraft.com
www.WMFwatercraft.net
#38
I've only seen one Bullet that didn't have them....and it wasn't used much. Before I bought my Top Gun, I called and talked with Craig Barrie and Scott Smith. Scott told me exactly where to look in the cabin (at the foot of the berth) and he assured me that it would have some cracks there. He was right. It was explained to me that they are not structural and it's a result of square angles and the flexing of the boat.
That being said, you HAVE to get a survey and have the transom, stringers and bulkheads checked out!!!!!!!! They are a different story!!!
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.






And my g/f's are the one I'm trying to put on a boat!