|
Originally Posted by OldSchool
(Post 2455458)
I have no idea. But....I made 2 of them in case I messed one of them up. Send a PM to Gripit, I mailed him the extra one. He can measure it for you!!
Craig |
If you can do the measuring of the lexan plate it would be appreciated. My boat is in storage a state away or I would measure the available plate area. I would like to order an aluminum powercoated plate asap, to be ready for install. Thanks
|
Originally Posted by Cree
(Post 2456054)
If you can do the measuring of the lexan plate it would be appreciated. My boat is in storage a state away or I would measure the available plate area. I would like to order an aluminum powercoated plate asap, to be ready for install. Thanks
I got your email about the antenna, Go to that thread that I posted and check post #94 to see where I mounted it on the dash. I went over to see my old Bullet and measure the lexan plate.....but there was still snow and ice on the cover. Next weekend on that. Sorry... Craig |
Originally Posted by OldSchool
(Post 2455805)
If you guys just want to know the dimensions of the lexan mounting plate, say the word and I'll go over and see my old Bullet this weekend and measure it. The guy lives less than a mile from my house. Let me know...
|
|
Thanks for checking and posting your pictures. Pics very helpful.
|
I went with the Garmin GPS Chartplotter 430. The surface mounting kit will not require a fabricated plate (to make up for the existing hole being to large.) The existing hole (previously for the compass) is small enough, to cut for the surface mounting hole requirements. Thanks for all the information.
|
| All times are GMT -5. The time now is 12:09 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.