|
Originally Posted by ciaoderhead
(Post 2527014)
Add about 14' if you want to leave the truck hooked up.
My shop is 30 X 40 outside dimensions so probably 29 X 39 inside. My old 311 Formula on a Loadmaster trailer would only fit if I removed the brake actuator from the tongue of the trailer. |
Originally Posted by HIGH PRESSURE
(Post 2522925)
How long is a Top Gun on the trailer
|
Originally Posted by Sydwayz
(Post 2526846)
That's for a short trailer. (Common on a Myco where the nose of the boat is only a few inches behind the coupler.)
You want a MINIMUM of 45 feet. My boat is a few inches shorter than a Top Gun, and its 43+ feet from the coupler to the diffuser rings with the drives trimmed out. |
Which trailer?
The boat sits a little lower on a steel Myco and a bit higher on aluminum. I know, I've had both. |
Originally Posted by ciaoderhead
(Post 2528131)
Ball to skeg, trimmed up............44'
|
Originally Posted by BillR
(Post 2528417)
Which trailer?
The boat sits a little lower on a steel Myco and a bit higher on aluminum. I know, I've had both. |
| All times are GMT -5. The time now is 10:53 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.