I am sure this has beed discussed countless times but I have an 08 tg with 525,s the 30 bravo's are hitting the rev limiter and when i put on 32's the port blows out trying to come on plane. The dealer owes me an extra set of stock props do you guys think the 30 maximus 5 blades would pick up top end drop the rpm and quit blowing out. I know I am asking for a lot. PS i have full cabin with 12v a/c 4 batteries and big stereo so I am a little heavier than some. Thanks!

The stock Maximus does not work well on anything. They have huge blade diameter and are extremely hard on Bravo drives. Basically, when you get an out of the box Maximus, you are buying raw stock. They do work very well when labbed for the application.

Nice looking guy in the top left of the picture in the green shirt. Your boat looked good that weekend.

Not to hijack but that Donzi ZRC rafted up on the outside, is that the one in the classified: http://www.offshoreonlyclassifieds.c...o23359-en.html

First of all i am running xr shorties that donzi was a new dealer boat with i think the 700 nxt package cool looking boat but i bet it is scary in some chop.

I would call Hydromotive and talk to them.

i tried a set of 30's could not get on plane they DO NOT work with this set up! Thanks though

I would call Throttle Up and talk to them about props. And just a little side note that Donzi does Very well in some chop with those 700's.

call Tim G at Cigarette, he can help.

Have your props or another set "Flat bladed". You'll gain some speed and you should be off the rev limiter.

Brett @ Bblades know what Flat Bladed is and how to do it. He can also do some tip work that will keep the prop hooked up while coming up on plane.