![]() |
Keeping wheel centered !!
Installed an Isotta wheele ( the one that is flattened at the bottom ) with the hydrolic imco steering system its always off center after a run....guess i should have done some research !! However before buying a new round wheele, ANYONE have advice on how to return a wheele to center with hydrolic steering ?????? guy with the crooked wheele !!
|
As far as I know its almost impossible to keep it centered all the time. My advice is don't worry about it. Just my .02
|
Originally Posted by SKRAMER
(Post 2569870)
As far as I know its almost impossible to keep it centered all the time. My advice is don't worry about it. Just my .02
|
Originally Posted by MOBILEMERCMAN
(Post 2569904)
If it is a hydraulic helm it is impossible.
|
Buy a steering wheel that is symetrical all the way around so you don't notice it.
|
cant worry about it..... it bothered me at first, but got over it quick......
|
Originally Posted by stecz20
(Post 2570010)
cant worry about it..... it bothered me at first, but got over it quick......
|
i thought i was the only one who couldnt figure that out !!
|
1 Attachment(s)
I have hydraulic steering and mine stays centered. Hope I didn't jynx myself.
|
2 Attachment(s)
Originally Posted by Top Ven
(Post 2570049)
i thought i was the only one who couldnt figure that out !!
when i redid the dash in the cafe, i didnt even think about it... thats how dumb i am....:evilb::evilb: what i always did when i shut it down at the dock, i would always turn the wheel the way it was supposed to go.... this way i looked like i knew what i was doing.... after a while, it became second nature.... the wheel looks so much better than most, it looks better upside down, then most do upright.....lol |
| All times are GMT -5. The time now is 03:40 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.