Top Gun project FINALLY FINISHED !
#24
Nice Job, Dave !! The all white rocks !!
Now you need a new place to put it behind.
Now you need a new place to put it behind.
#26
Thread Starter
Registered
Joined: May 2006
Posts: 168
Likes: 0
From: Ft lauderdale, Fl
Thanks guys.....it really took alot of time and effort....Tommy at Chief Engines really went out of his way to make sure every detail, wire and screw was perfect. The interior was done by Fineline, they had to totally reconstruct the seating shells from scratch. The boat was totally gutted and painted, the dash was a total improvement also. I put JL components for the soundsystem, new 3A's that I found, and rebuilt the gimbals with pins that I had custom made three times the normal size. Still working out the props as I changed the gear ratio. Tommy had the platform custom made, it's great !
I'm actually thinking about a wind screen....that is next on the improvement list ....
Thanks......
I'm actually thinking about a wind screen....that is next on the improvement list ....
Thanks......
#27
Thread Starter
Registered
Joined: May 2006
Posts: 168
Likes: 0
From: Ft lauderdale, Fl
#29
Looks GREAT - good job!!!!
I did the same thing w/ my TG.
One word of advice - DO NOT revisit the receipts. Trust me, you don't want an accurate accounting of what you spent.
My boat looks better than when it was new from CIG.
I did the same thing w/ my TG.
One word of advice - DO NOT revisit the receipts. Trust me, you don't want an accurate accounting of what you spent.
My boat looks better than when it was new from CIG.
__________________
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron





