![]() |
Originally Posted by stecz20
(Post 2661672)
or do you want to own a donzi and big a big penis like tom a????? you make the choice......:evilb::evilb:
Thanks for the Comp,liment Stecz!:evilb: By the way, the above statement is directed at Stecz and in no way reflects how I feel about Cigarettes or their owners!:drink: |
Originally Posted by Tom A.
(Post 2662733)
I think this statement speaks for itself. When you run a Comp., you are not making up for any short comings!
Thanks for the Comp,liment Stecz!:evilb: By the way, the above statement is directed at Stecz and in no way reflects how I feel about Cigarettes or their owners!:drink: |
I was on the Chesapeake running the snot out of my Comp for three days. With the fresh Potter motors we got her up to 115!
|
1 Attachment(s)
Originally Posted by omerta one
(Post 2662068)
Donzi brought an all orange 38ZRC w/700's to the shootout...supposed to run 114'ish. The boat looks really good; we'll see how it runs today.
|
Originally Posted by Tom A.
(Post 2663208)
I was on the Chesapeake running the snot out of my Comp for three days. With the fresh Potter motors we got her up to 115!
|
2 Attachment(s)
Originally Posted by fountain40icbm
(Post 2663444)
Dan, looks like we need to buy the FAST ZRC from OP,now!!!!!!!!!!!!!!!
:ernaehrung004: A Couple of pics from the past weekend in the Chesapeake. |
Originally Posted by Tom A.
(Post 2663208)
I was on the Chesapeake running the snot out of my Comp for three days. With the fresh Potter motors we got her up to 115!
What's the story on those motors (HP) and did you do anything to beef up the drives? |
The motors are originally 575's. They were built by Ron Potter to 700+, I haven't seen the Dyno sheets but they are roller motors and spin to 5800 rpm.
As for the drives, well.......they are '07 Bravo Xrs. I have to be real careful until I can come up with a better drive solution. |
Originally Posted by omerta one
(Post 2662068)
Donzi brought an all orange 38ZRC w/700's to the shootout...supposed to run 114'ish. The boat looks really good; we'll see how it runs today.
|
Originally Posted by Tom A.
(Post 2664404)
The motors are originally 575's. They were built by Ron Potter to 700+, I haven't seen the Dyno sheets but they are roller motors and spin to 5800 rpm.
As for the drives, well.......they are '07 Bravo Xrs. I have to be real careful until I can come up with a better drive solution. |
| All times are GMT -5. The time now is 02:18 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.