My 20 Cig Project
#1
Registered
Thread Starter
My 20 Cig Project
I have been working on redoing my 20 Cig for about 2 years and I wanted to share some pics. I know there are quite a few people working on their own 20 projects so I hope everyone enjoys them. I know that I enjoy following projects that people have done.
My 20 Cigarette is a 1982. She is getting a complete redo. The boat is not complete but hopefully will be done this spring/summer. All of the fiberglass work will be completed by the end of December. Following some fit checks for the motor, it will then go to Phil @ Lip-Ship for paint, rigging, and interior.
First pics show the condition I purchased it in.
Here are some pics and I will post as the progress continues. Enjoy!
Daren
My 20 Cigarette is a 1982. She is getting a complete redo. The boat is not complete but hopefully will be done this spring/summer. All of the fiberglass work will be completed by the end of December. Following some fit checks for the motor, it will then go to Phil @ Lip-Ship for paint, rigging, and interior.
First pics show the condition I purchased it in.
Here are some pics and I will post as the progress continues. Enjoy!
Daren
#2
Registered
Thread Starter
Just getting it ready to gut everything
#3
Registered
Thread Starter
Prior owner had boat primed and painted white. Third pic shows the original gelcoat color and you can see the original graphics lines as well.
#5
Registered
Thread Starter
empty shell
#6
Registered
Thread Starter
Bottom
#7
Registered
Thread Starter
More to come in the next week.
#8
Registered
Thread Starter
#9
Charter Member #139 /Moderator/Platinum Member
Charter Member
Join Date: Nov 2000
Location: McHenry IL /Duck Key FL
Posts: 2,201
Likes: 0
Received 0 Likes
on
0 Posts
looks great what did you do with old seats? I am going rig mine with a console and high back buckets but those sure would make neat bar stools.
in my river room if you dont have plans for them
What are your rigging plans
I am going to use a ITS on mine either with a blackhawk of shorty bravo hooked to a 500HP.
in my river room if you dont have plans for them
What are your rigging plans
I am going to use a ITS on mine either with a blackhawk of shorty bravo hooked to a 500HP.
__________________
Kept the Bullet and the condo and joined the cig 20 restoration club.
Kept the Bullet and the condo and joined the cig 20 restoration club.
#10
Registered
Thread Starter
looks great what did you do with old seats? I am going rig mine with a console and high back buckets but those sure would make neat bar stools.
in my river room if you dont have plans for them
What are your rigging plans
I am going to use a ITS on mine either with a blackhawk of shorty bravo hooked to a 500HP.
in my river room if you dont have plans for them
What are your rigging plans
I am going to use a ITS on mine either with a blackhawk of shorty bravo hooked to a 500HP.
As far as rigging, i picked up an ITS transom assy a while back for it and a BH drive. I have the motor for it as well but I am going to wait until it is done to let that out
Good luck with your project! I look forward to seeing it!