cig 20 stringers
 

anyone know the dimension aparts the stingers are on a cig 20
I dont have mine at the house yet and I have a line on a offshore mount and want to majeke sure it will fit

klaw

get ahold of/pm glassdave, he has one apart in his shop right now

yes I have talked to Dave and will call again and ask him was just hoping someone had it handy

I also have one apart in my shop, but I am not there today. I will try to snag a measurement between the stringers next time I am there & post it.. The one in my shop is a 1974 & it is getting everything.. :D Jamie / Lakeside

measured mine today, 29 3/4 give or take 1/8

Curious...what is the price range for "everything"?

Price & the word "everything" are relative.. It really depends on what all is getting done, choice of interior, gauges, Power, drive, etc....

I dont mean to sound rude or anything, it is just one of those things that has a lot of variables with the sky almost being the limit. I usually assess projects on an individual basis, as each one is usually a bit different from the other.

On this hull particular customers hull the frames & transom are in good shape. BUT the hatches are a mess, there is some recoring needed, there are a lot of cracks in the deck, the fuel tank was shot, the teak deck inlay & dash were rotted out & shot, the interior shot, trailer was a lost cause & there is no existing power or instruments. So there is a lot of glass work & other stuff to do before even getting to think of the interior or power. Needless to say it can obviously get expensive on the ones requiring this amount of work.

:) Jamie / Lakeside

The Stringers are about 30.25" apart inside to inside on the 1974 one that is in our shop. So if the other guys (cig28) are a bit different (narrower) there appears to be some variations on spacing on some of these.. :) Jamie / Lakeside

thanks for the info the numbers are close enough to see if I can buy the front engine mount

No problem, youre welcome.. :) Jamie / Lakeside