klaw

anyone know the dimension aparts the stingers are on a cig 20
I dont have mine at the house yet and I have a line on a offshore mount and want to majeke sure it will fit

klaw

phragle

iTrader: (3)

get ahold of/pm glassdave, he has one apart in his shop right now

klaw

yes I have talked to Dave and will call again and ask him was just hoping someone had it handy

LAKESIDE RESTORATIONS

I also have one apart in my shop, but I am not there today. I will try to snag a measurement between the stringers next time I am there & post it.. The one in my shop is a 1974 & it is getting everything.. Jamie / Lakeside

cig28

measured mine today, 29 3/4 give or take 1/8

omerta one

Curious...what is the price range for "everything"?

LAKESIDE RESTORATIONS

Price & the word "everything" are relative.. It really depends on what all is getting done, choice of interior, gauges, Power, drive, etc....

I dont mean to sound rude or anything, it is just one of those things that has a lot of variables with the sky almost being the limit. I usually assess projects on an individual basis, as each one is usually a bit different from the other.

On this hull particular customers hull the frames & transom are in good shape. BUT the hatches are a mess, there is some recoring needed, there are a lot of cracks in the deck, the fuel tank was shot, the teak deck inlay & dash were rotted out & shot, the interior shot, trailer was a lost cause & there is no existing power or instruments. So there is a lot of glass work & other stuff to do before even getting to think of the interior or power. Needless to say it can obviously get expensive on the ones requiring this amount of work.

Jamie / Lakeside

LAKESIDE RESTORATIONS

The Stringers are about 30.25" apart inside to inside on the 1974 one that is in our shop. So if the other guys (cig28) are a bit different (narrower) there appears to be some variations on spacing on some of these.. Jamie / Lakeside

klaw

thanks for the info the numbers are close enough to see if I can buy the front engine mount

LAKESIDE RESTORATIONS

No problem, youre welcome.. Jamie / Lakeside