http://www.offshoreonly.com/classifi...o24481-en.html

any info please?

PM Old School, Craig's buddy here in Maryland use to own it.

Check your email. I do know the previous owner and it doesn't look like any hours have been put on it since.

Craig

Nice, a tad too much yellow for me in the cockpit though.

Looks nice. Motors and blowers need to be refreshed at those hours.
Figure to put about $2000 in blower upgrades, and $8 to $12 K in each motor rebuild.

Now this one is in far better shape, has fresh rebuilds, in fact fresh everything:
http://www.powerboatlistings.com/view/6425

that is nice

first it is one year newer, second it has ITS steering and boxes, third it has sportmaster lowers... and 149 is asking price

And you are going to have to redo that yellow and blue interior.

ITS/sportmasters means it is a chore to get on plane; even more difficult if water is rough - but they sure look sweet!
That may be newer, but I'll guarantee mine is in better condition. His need rebuilds, mine are fresh Joey Griffin rebuilds and have about 668 Hp ea, over 700 if you add the smaller pulley.
My interior is not yellow - my upholstery is new, my bilge was re- rigged, re-finished and everything in there is new. My dash has new paint, new updated guages, no scratches, new clearcoating on the deck. I also have a list and receipts of what has been done to it. My has been stem to stern - restored - with an open checkbook. Anyone want to see my list of what I did, I'll post it, but it is a looong but impressive read.

That boat is nice - no doubt. Mine is basically new - and can pass as such even under the most discriminating eye, and BTW; the Myco is new (aluminum not steel) too and never been in the water, and yes my boat is more expensive, but one look and you'll have out the check book cause everything else will pale in comparison. Guaranteed it is as good or better than I state, or I'll pay for your trip home.

With the right props, sportmasters get on plane very nicely. However, if you want a like new Topgun ready to go, you should look at BillR's.