Conversation with the farther of the blackhawk
01-29-2009 | 11:25 AM
#1
Thread Starter
Charter Member #139 /Moderator/Platinum Member
Joined: Nov 2000
Posts: 2,201
Likes: 0
From: McHenry IL /Duck Key FL
Conversation with the farther of the blackhawk
I talked to Gary Meisenberg last night he was project manager of the Blackhawk drive
I was looking fo insite on the x-dim for my 20 he said from his original testing that on my straight botton 20 that I should put the bottom of the bullet at or one inch above the keel.
Inrteresting conversation he at on time had one that was cut in half and he could space down to arrive at the best running x-dim
Mine transom is already cut hope I dont have to refil and cut again
Klaw
I was looking fo insite on the x-dim for my 20 he said from his original testing that on my straight botton 20 that I should put the bottom of the bullet at or one inch above the keel.
Inrteresting conversation he at on time had one that was cut in half and he could space down to arrive at the best running x-dim
Mine transom is already cut hope I dont have to refil and cut again
Klaw
__________________
Kept the Bullet and the condo and joined the cig 20 restoration club.
Kept the Bullet and the condo and joined the cig 20 restoration club.
01-29-2009 | 12:02 PM
#3
Thread Starter
Charter Member #139 /Moderator/Platinum Member
Joined: Nov 2000
Posts: 2,201
Likes: 0
From: McHenry IL /Duck Key FL
Rob I have drawn the transom with a ITS and blackhawk to get the dimension i will check tonight and send you PDF of where it will be
__________________
Kept the Bullet and the condo and joined the cig 20 restoration club.
Kept the Bullet and the condo and joined the cig 20 restoration club.
02-01-2009 | 08:46 AM
#5
Registered
Joined: Aug 2004
Posts: 1,647
Likes: 68
From: MA/NH
05-15-2009 | 02:01 PM
#6
Charter Mod
Joined: May 2000
Posts: 6,551
Likes: 3
From: E Dock
Thread
Thread Starter
Forum
Replies
Last Post
ratman
General Boating Discussion
21
04-12-2006 09:53 PM
