|
New interior for my Cafe'...
East Coast boat, but a "West Coast flavor" on the interior...lots of carbon fiber.
http://www.performanceboats.com/html.../DSCN07111.jpg New front bolsters... http://www.performanceboats.com/html.../DSCN07121.jpg http://www.performanceboats.com/html.../DSCN07141.jpg Got rid of the carpet in the cabin... http://www.performanceboats.com/html.../DSCN07131.jpg |
Loncoin flooring w/LEDs in the storage compartments...
http://www.performanceboats.com/html...0/CIMG7064.JPG http://www.performanceboats.com/html...0/CIMG7058.JPG Updated the shower to this small stainless unit while I was at it.. http://www.performanceboats.com/html...0/DSCN0717.jpg New hatch w/pro stock scoops... http://www.performanceboats.com/html.../DSCN07151.jpg http://www.performanceboats.com/html...8/CIMG7068.JPG |
http://www.performanceboats.com/html.../DSCN07201.jpg
Upgraded the stereo to around 2,000 wats w/2-12's in the side panels- sounds killer. Now I just gotta figure out if I am actuially gonna keep it...lol. :cool: |
Loncoin flooring
Very nice job. How tuff was the Loncoin flooring install?
|
WOW.... Looks Great!
|
Originally Posted by wnelles
(Post 2817496)
Very nice job. How tuff was the Loncoin flooring install?
|
Nice job!
|
That looks great! i am in process of doing my berth but wont be anywhere as near custom as yours.
How did they do the vinyl around the wood trim piece by the door? I like how that looks. |
Wow.....
|
Originally Posted by BDiggity
(Post 2817535)
That looks great! i am in process of doing my berth but wont be anywhere as near custom as yours.
How did they do the vinyl around the wood trim piece by the door? I like how that looks. The top teak piece and the lower one (where you step into the cabin) are gel coated white, but the side pieces and the top piece in the entry way (where I always hit my head getting into the cabin...lol) are wrapped in vinyl with a little padding like any upholstry piece. Since all the seats are custom, I also had them raise the rear seat base 2" (so you can see better when underway), and they reclined the rear bench a little for comfort. The front bolsters were lowered a little when seated, and reclined a little for comfort when underway. |
Holy sh!t, that came out nice!
You actually cut into the gunnals to allow for the speakers, storage and grab handle? Great way to utilize space! Who did the work? |
Looks awesome!
Are the fronts not drop-outs? I really love the oldschool boats with modern updates like this. Any pics of the whole boat? |
Originally Posted by rlj676
(Post 2817583)
Looks awesome!
Are the fronts not drop-outs? I really love the oldschool boats with modern updates like this. Any pics of the whole boat? |
Originally Posted by thisistank
(Post 2817586)
Last time I saw it, it was all white. Think it still is.
I thought that was the case from what I'd read on hotboat or somewhere, but have never actually seen pics. All white with the new interior will look real nice. |
Very nicely done!
|
Very nice :cool::cool::cool:
|
Very Nice job
|
Originally Posted by thisistank
(Post 2817582)
Holy sh!t, that came out nice!
You actually cut into the gunnals to allow for the speakers, storage and grab handle? Great way to utilize space! Who did the work? I had it done at West Coast Marine Interiors- they do alot of work for Ultra, etc. Yeah, the gunnels were cut. We sat in the boat, and Danny said we could make the back seat feel bigger by doing a couple things: 1. Cig built the seat out about 4" from the bilge divider- we could utilize that space to recline the bench and add leg support. 2. Cig made the bench kinda "rounded" in the corners...which could be made more "square" (like Skater bolsters). 3. Make the bench armrests smaller making the bench a little wider (so four people won't be so crowded). 4. Move the cupholders and grab handles into the gunnels- the cutouts would make the narrow beam boat feel bigger. When the entire cockpit was out, he sketched the new seating arrangement and where the cutouts would be. They cut them out, then made the sidepanels to fit in the new holes. Here's a better pic of the rear bench: http://www.performanceboats.com/html.../DSCN07231.jpg The bolsters still dropout (stock Cig pedestals): http://www.performanceboats.com/html.../DSCN07091.jpg Here's a pic of the old interior (old gauges, old interior, old floor, and old blower hatch): http://www.performanceboats.com/html...oker_Run_1.jpg Thanks for all the kind words! |
i love it, what State did the work ?
|
Originally Posted by Top Ven
(Post 2817690)
i love it, what State did the work ?
Too funny...I picked up the boat today, and there are pics up already...lol. :p |
Excellent Craftsmanship. Be Proud.
|
Originally Posted by Havasu Hangin
(Post 2817680)
Hey Tank-
I had it done at West Coast Marine Interiors- they do alot of work for Ultra, etc. Yeah, the gunnels were cut. We sat in the boat, and Danny said we could make the back seat feel bigger by doing a couple things: 1. Cig built the seat out about 4" from the bilge divider- we could utilize that space to recline the bench and add leg support. 2. Cig made the bench kinda "rounded" in the corners...which could be made more "square" (like Skater bolsters). 3. Make the bench armrests smaller making the bench a little wider (so four people won't be so crowded). 4. Move the cupholders and grab handles into the gunnels- the cutouts would make the narrow beam boat feel bigger. When the entire cockpit was out, he sketched the new seating arrangement and where the cutouts would be. They cut them out, then made the sidepanels to fit in the new holes. Here's a better pic of the rear bench: http://www.performanceboats.com/html.../DSCN07231.jpg The bolsters still dropout (stock Cig pedestals): http://www.performanceboats.com/html.../DSCN07091.jpg Here's a pic of the old interior (old gauges, old interior, old floor, and old blower hatch): http://www.performanceboats.com/html...oker_Run_1.jpg Thanks for all the kind words! That's the sh!t Jeff...I love how well it was thought out.:cool: |
|
Thats incredible. Best interior job i have seen. Besides a brand new Cig.
|
That re-do is P I M P.... have fun with it !
|
Very Nice!!!!
|
That is stellar! Not only great with the needle and thread, but making use of all the available space is an outstanding display of ingenuity and craftsmanship!!! :ernaehrung004:
|
Looks good, and the white is classic. With that interior it looks brand new, as white never goes out of style.:drink:
The additional storage/cupholders really look good too. |
Congratulations on an incredible project!
|
that s ****ing bad.... GREAT JOB
|
Amazing!!! Absolutely gorgeous.
|
Very NICE!!!!
|
That is awesome very nice!:ernaehrung004:
|
Nice Job, boat came out Nice!!!!
|
WOW!!!:drink:
|
Looks great. I love the blue accent lighting.
|
Very nice!
|
:drink:Most original Cafe update I have seen. GREAT JOB!!:drink:
|
Great Job!!!!!!!!!!!!!!!
|
Very , very nice work
|
| All times are GMT -5. The time now is 06:25 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.