Lin, I assume you have the hatch removed, and flipped downside up. Perhaps you could cut it into 2" strips with a properly set router, and individually pry each strip up with a strong putty knife. Just an idea--I've never tried it.

Hey Brian. That's sorta what I've been doing....Using a cicular saw set at the thickness of the plastic mirror and doing a cross hatch pattern. With the DeBond the small pieces come up pretty easy, just time consuming....then I still need to get the 5200 off the hatch.

I'd sure like to see some pictures of your progress. I have a cracked mirror and was wondering how bad a job that would be.

I removed mine with 100 pound test fishing line . A sawing motion back and forth to cut thru the Adhesive. Then a lot of Acetone and a scraper. Daytona Plastics had the replacement Plexi and the special adhesive.

does datyona plastics have exact replacement and do they have the different colors ? that was a great idea the fishing line. I guess piano wire would work also thx, greg

Man I am so screwed.....so I'm making progress removing the mirror, little bit here little bit there. Coming apart in small pieces but going ok. Slow but OK.

GF comes out and says "Oh, so that's what you've been doing...Is that considered bad luck?"

I reply "You're not helping, F.O. and go back inside":party-smiley-004:

Yea get your ass inside (now thats funny)

I make mine help:drink: