38 T/s X Dim For #6
08-31-2009, 06:54 AM
#1
Platinum Member
Platinum MemberThread Starter
iTrader: (1)
Join Date: Dec 2002
Location: lafayette La.
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
38 T/s X Dim For #6
Can Anyone Help With The X Dim Of A 38 Ts Gun With #6 Drives.fixing To Start A New Project,repower With Drives
I Know Someone Had To Do This, Can You Give Me A Starting Point? What Is Your Setup?
I Know Someone Had To Do This, Can You Give Me A Starting Point? What Is Your Setup?
08-31-2009, 08:42 AM
#3
Call Cigarette or Lip-Ship.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
08-31-2009, 09:06 AM
#4
VIP Member
VIP Member
Randy at Cobra Power is one of the only guys that I know that has done this....... he did the yellow one with 1200hp and did the red one with 1050hp. call 305-893-5018
08-31-2009, 10:01 AM
#5
Platinum Member
Platinum Member
Call Phil first, most of the t/s guns with 6's have issues.
Hot For Teacher is an exception and it handles great. from what i understand it isn't setup any different but it just works better then the rest.
Hot For Teacher is an exception and it handles great. from what i understand it isn't setup any different but it just works better then the rest.
Gold Member
09-01-2009, 06:23 AM
#8
Platinum Member
Platinum MemberThread Starter
iTrader: (1)
Join Date: Dec 2002
Location: lafayette La.
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Jmbtile
Where Are You Running Your Drive Heigth. I Was Told To Run The Center Prop Shaft With Even With The Running Surface Directly In Front Or The Drive?
Where Are You Running Your Drive Heigth. I Was Told To Run The Center Prop Shaft With Even With The Running Surface Directly In Front Or The Drive?
09-01-2009, 12:38 PM
#9
Warped & Twisted Member
Platinum Member
