Offshoreonly.com - Cafe Racer Prop Set-up

Page 4 of 4

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)

- - Cafe Racer Prop Set-up (https://www.offshoreonly.com/forums/cigarette/223020-cafe-racer-prop-set-up.html)

Sean	01-20-2010 10:10 AM

Quote:

Originally Posted by seafordguy (Post 3027738)

I run wieand 177 blowers on a set of 502's. I estimate is it just shy of 600hp - I run 4 blade 26's. I think with light fuel and in some decent chop it is a 75mph boat. 5100-5200rpm.

my 87 with 496HOs and bravo drives ran 4 blade 26" props at 5000 rpm. speed was just shy of 70 mph.

ajacobazzi

01-22-2010 02:33 PM

5 Attachment(s)

I know this isn't how the thread started, but, some of you had asked.......so......here are some additional photos of the cabin work.

anewway

01-22-2010 04:34 PM

Man, that's turning out great!!!!

Sick Stinger

01-22-2010 05:23 PM

Hey AJ or anyone, done anyting with the switch panel just infront og the v birth?
-Mike

ajacobazzi

01-22-2010 07:05 PM

Quote:

Originally Posted by Sick Stinger (Post 3029636)

Hey AJ or anyone, done anyting with the switch panel just infront og the v birth?
-Mike

Not yet, but it's on the list. It'll be done before the boat hits the water.

ajacobazzi

01-22-2010 07:07 PM

Quote:

Originally Posted by anewway (Post 3029604)

Man, that's turning out great!!!!

Thank you! Much better than the old, stained and stinky fabric!

All times are GMT -5. The time now is 11:03 AM.

Page 4 of 4

« First

Show 40 post(s) from this thread on one page