Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   Cafe Restoration Update (https://www.offshoreonly.com/forums/cigarette/227350-cafe-restoration-update.html)

BDiggity 06-01-2010 06:40 PM

the platinum adds a nice bling factor. i like it much better than a white on white combo which the eye would just scan over.

ajacobazzi 06-02-2010 09:30 AM

Thank you everyone, for the kind words. I'll be sure to share more photo's over the next couple for weeks as we arrive to 100% completion. :)

frickstyle 06-03-2010 10:38 AM

Your dash is exactly what I'm looking for. It looks classic and elegant. Very subtle until you really start to notice little things that make it look professinal. Well done.

ajacobazzi 06-03-2010 11:08 AM


Originally Posted by frickstyle (Post 3126193)
Your dash is exactly what I'm looking for. It looks classic and elegant. Very subtle until you really start to notice little things that make it look professinal. Well done.

That's exactly what I was going for! Thank you for noticing!! :) I should have some new photo's to share tomorrow.

ajacobazzi 06-04-2010 03:01 PM

4 Attachment(s)
Some new photo's to share this week...........

Sick Stinger 06-04-2010 03:11 PM

Where you poppin the gps. I just bough a flush mount to put it above the door inlet.

ajacobazzi 06-04-2010 03:27 PM

1 Attachment(s)

Originally Posted by Sick Stinger (Post 3127291)
Where you poppin the gps. I just bough a flush mount to put it above the door inlet.

To the right of the compass there's a black clip. Just behind the clip is the hard wire connection. I have a portable Garmin Road/Marine that I'll be using. I should have bought a flush mount, but, I'm past that now. :(

BDiggity 06-04-2010 03:44 PM

How did u flush mount the cleats? When i had the berth interior apart, i thought i would replace the two along the deck side. But the way the top joined the hull, there wasnt the needed 3" of clearance.

ajacobazzi 06-04-2010 04:08 PM


Originally Posted by BDiggity (Post 3127326)
How did u flush mount the cleats? When i had the berth interior apart, i thought i would replace the two along the deck side. But the way the top joined the hull, there wasnt the needed 3" of clearance.

I see you have a 91. Is the deck elevated on the 91's?

BDiggity 06-04-2010 04:46 PM


Originally Posted by ajacobazzi (Post 3127343)
I see you have a 91. Is the deck elevated on the 91's?

no its pretty flat. i dont think i have a picture of the underside of the old cleat. but where the "notch" in the deck is where the cleat mounts, there is only about 1.5" of room to where the hull flares out to meet the deck. thats my best non professional explanation. i still plan on putting them at the bow to clean it up some.


All times are GMT -5. The time now is 02:24 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.