38 cig flat deck
11-02-2010 | 10:06 AM
#12
Registered
Joined: Sep 2009
Posts: 790
Likes: 0
From: leamington ON LAKE ERIE
11-04-2010 | 09:19 AM
#13
Neno the mind boggler
Joined: Sep 2001
Posts: 13,080
Likes: 320
From: toledo oh
Hey Kris refresh my memory again? was it Cap'n an Coke or Cap'n an diet Coke. 
see ya next week
see ya next week
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
11-04-2010 | 04:51 PM
#15
Registered
Joined: Aug 2003
Posts: 1,129
Likes: 32
From: Racine, Wisconsin
Jay
Here's a pic of the hatch underside. The hatch did not come with the center beam it was added for two reasons. 1. So I had a good place to mount the hydraulic ram. I still have fab a bracket, it goes where the blue tape is. and 2. For strength, since I cut big air intakes in the front and back I wanted to be sure the hatch was still structurally sound.
Kris
Here's a pic of the hatch underside. The hatch did not come with the center beam it was added for two reasons. 1. So I had a good place to mount the hydraulic ram. I still have fab a bracket, it goes where the blue tape is. and 2. For strength, since I cut big air intakes in the front and back I wanted to be sure the hatch was still structurally sound.
Kris
11-04-2010 | 07:02 PM
#16
Registered
Joined: Sep 2009
Posts: 790
Likes: 0
From: leamington ON LAKE ERIE
Jay
Here's a pic of the hatch underside. The hatch did not come with the center beam it was added for two reasons. 1. So I had a good place to mount the hydraulic ram. I still have fab a bracket, it goes where the blue tape is. and 2. For strength, since I cut big air intakes in the front and back I wanted to be sure the hatch was still structurally sound.
Kris
Here's a pic of the hatch underside. The hatch did not come with the center beam it was added for two reasons. 1. So I had a good place to mount the hydraulic ram. I still have fab a bracket, it goes where the blue tape is. and 2. For strength, since I cut big air intakes in the front and back I wanted to be sure the hatch was still structurally sound.
Kris
