39 Cig 525 whipples
10-08-2010 | 03:44 PM
#11
Gold Member
Joined: Apr 2006
Posts: 2,966
Likes: 9
From: LOTO
100% agree with 525's not being enuf. Just buy a 700 boat and you'll be a happy camper.
10-08-2010 | 04:16 PM
#12
arneson-industries.com
Joined: Jan 2001
Posts: 2,782
Likes: 7
From: California
Boat runs great he says.
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
10-08-2010 | 04:28 PM
#13
Registered
Joined: Jan 2005
Posts: 96
Likes: 1
I whippled my 525's, they dyno'd at 780hp/735ftlbs of torque . I have xr's with imco lowers. Installed on a 39 velocity which is lighter. Have been a reliable setup. As customryder stated if you drive sensibly setup should last.
10-08-2010 | 10:33 PM
#16
arneson-industries.com
Joined: Jan 2001
Posts: 2,782
Likes: 7
From: California
The best part is that the owner says it handles better, gets on plane easier and is better all around than the Bravos!
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
10-09-2010 | 08:08 AM
#18
Registered
Joined: Jul 2006
Posts: 1,558
Likes: 0
From: Rockwood MI. Kalkaska MI. Sopron Hungary.
Sounds about right, it is a nice package if done correctly with some drive upgrades you should be good to go.
10-09-2010 | 01:47 PM
#19
arneson-industries.com
Joined: Jan 2001
Posts: 2,782
Likes: 7
From: California
If you are going to upgrade the power you might as well go all the way.. 
http://www.youtube.com/watch?v=gWTKf0FSO7w
http://www.youtube.com/watch?v=gWTKf0FSO7w
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
