Anyone ran P5x props on a gladiator
 

Tring to get some prop info on this boat. I have 6 blade herrings and want to settle down the asss of the boat. It gets loose over 100mph.

Check with Brett at BBlades, but from what I have been told, more blades make for more stern lift. or may want to check with Herring/Ben Robertson.

I did I cant decide what to run next might run staggered size 6 blade herrings or 5 blade herrings. P5x is also a candidate

I would try 5 bladed Herings

i wish i had your problem

Got a set of p5s. They were on a slingshot with 700 plus a side with a 1.5 gear ratio. They are labbed 31s. Were not on the boat very long and in perfect condition. PM if interested.

Ben

Try driving the boat a little longer and get the feel for it and you might figure out how to make the stern settle down... in the end you might save $$$ on props.

I got ya good idea. I also just wanted to see if anyone with more expierence in the Gladiator had any good ideas.

Hang on to them. Might need them next weekend.

You know where they are, give Brett a call, there is a set of 4 blade labbed mercs there too.