Go Back  Offshoreonly.com > Owners Forum > Cigarette
Anyone ran P5x props on a gladiator >

Anyone ran P5x props on a gladiator

Notices

Anyone ran P5x props on a gladiator

Thread Tools
 
Old 10-13-2010 | 12:37 PM
  #1  
Thread Starter
Registered
 
Joined: Aug 2006
Posts: 1,126
Likes: 0
From: Dallas Ga
Default Anyone ran P5x props on a gladiator

Tring to get some prop info on this boat. I have 6 blade herrings and want to settle down the asss of the boat. It gets loose over 100mph.
johnlomant is offline  
Reply
Old 10-13-2010 | 01:02 PM
  #2  
offshoredrillin's Avatar
VIP Member
20 Year Member
VIP Member
 
Joined: Feb 2004
Posts: 12,314
Likes: 1,556
From: Maryland
Default

Check with Brett at BBlades, but from what I have been told, more blades make for more stern lift. or may want to check with Herring/Ben Robertson.
offshoredrillin is offline  
Reply
Old 10-13-2010 | 01:30 PM
  #3  
Thread Starter
Registered
 
Joined: Aug 2006
Posts: 1,126
Likes: 0
From: Dallas Ga
Default

I did I cant decide what to run next might run staggered size 6 blade herrings or 5 blade herrings. P5x is also a candidate
johnlomant is offline  
Reply
Old 10-13-2010 | 01:52 PM
  #4  
ktron's Avatar
Registered
20 Year Member
 
Joined: Aug 2004
Posts: 1,647
Likes: 68
From: MA/NH
Default

I would try 5 bladed Herings
ktron is offline  
Reply
Old 10-13-2010 | 03:12 PM
  #5  
Registered
 
Joined: Jul 2005
Posts: 728
Likes: 0
From: Baton Rouge/Loto Camden
Default

i wish i had your problem
Outkast Rafe is offline  
Reply
Old 10-13-2010 | 08:42 PM
  #6  
VIP Member
 
Joined: May 2002
Posts: 1,096
Likes: 0
From: Central Illinois
Default

Got a set of p5s. They were on a slingshot with 700 plus a side with a 1.5 gear ratio. They are labbed 31s. Were not on the boat very long and in perfect condition. PM if interested.

Ben
SLOWRIDE-388 is offline  
Reply
Old 10-14-2010 | 08:51 AM
  #7  
Registered
 
Joined: Sep 2003
Posts: 272
Likes: 0
From: Newport, MI
Default

Originally Posted by johnlomant
Tring to get some prop info on this boat. I have 6 blade herrings and want to settle down the asss of the boat. It gets loose over 100mph.
Try driving the boat a little longer and get the feel for it and you might figure out how to make the stern settle down... in the end you might save $$$ on props.
TheGladiator is offline  
Reply
Old 10-14-2010 | 06:34 PM
  #8  
Thread Starter
Registered
 
Joined: Aug 2006
Posts: 1,126
Likes: 0
From: Dallas Ga
Default

Originally Posted by TheGladiator
Try driving the boat a little longer and get the feel for it and you might figure out how to make the stern settle down... in the end you might save $$$ on props.
I got ya good idea. I also just wanted to see if anyone with more expierence in the Gladiator had any good ideas.
johnlomant is offline  
Reply
Old 10-14-2010 | 07:48 PM
  #9  
Registered
 
Joined: Sep 2008
Posts: 1,200
Likes: 1
From: LOTO
Cool

Originally Posted by SLOWRIDE-388
Got a set of p5s. They were on a slingshot with 700 plus a side with a 1.5 gear ratio. They are labbed 31s. Were not on the boat very long and in perfect condition. PM if interested.

Ben
Hang on to them. Might need them next weekend.
redbud35 is offline  
Reply
Old 10-14-2010 | 09:30 PM
  #10  
VIP Member
 
Joined: May 2002
Posts: 1,096
Likes: 0
From: Central Illinois
Default

Originally Posted by redbud35
Hang on to them. Might need them next weekend.
You know where they are, give Brett a call, there is a set of 4 blade labbed mercs there too.
SLOWRIDE-388 is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.