![]() |
2 Attachment(s)
Originally Posted by Dan Adams
(Post 3390713)
Sorry, couldn't resist. I get corrected half the time I post, with good reason, lol.
It was interesting at Bens with your 6s going on Mitches boat, Mitches 3As going on Todds 38. Wonder where Todds TRS went to? Your 6s were so nice I thought it was a mistake to paint them blue. But, look they are awesome. Your gundrilled titanium tiebar doesn't hurt either:drink::drink: Speaking of tie bars,....here is the monster tie bar (Titanium) weighing. ( 9.6 LBS ) after gundrilling the inside out. Weighed 15 LBS. before drilling. :drink: ( Mitch's 38 cig with wetsump #6 conversion 1:62 gear ratio) Torque multiplier,....lots of mid range acceleration:eek: Jon |
2 Attachment(s)
Few more pictures of Curts 38,.......posted by ( BLee ) in another thread.
Primal Instinct / Chief Engines Jon |
Originally Posted by cougarman
(Post 3390950)
Few more pictures of Curts 38,.......posted by ( BLee ) in another thread.
Primal Instinct / Chief Engines Jon |
Originally Posted by jaysflatdeck
(Post 3390962)
Curts boat running dry sump 6s also do you no what gear ratio
Curt Ganos 38' 1.62 ratio also,.........not sure if Curts is Wet or dry? Dan Adams or Nautikitty would know for sure. Nautkitty ( Parnell ) also ran the 1.62 in his 41' Saber and Curt and Parnell ran together alot. All these boats are maintained, wrenched on or stored at the same camp, See a pattern with the gear ratio? It Works! Pretty tight group of enthusiast. Besides you'll do more boating in mid range than top end so why not have a gear that gives you the acceleration factor? Thanks Jon |
Originally Posted by cougarman
(Post 3391109)
38' 1.62 ratio WETsump
See a pattern with the gear ratio? It Works! Pretty tight group of enthusiast. Besides you'll do more boating in mid range than top end so why not have a gear that gives you the acceleration factor? Thanks Jon |
all the above boats have a notched transom...cant you see this !!!!
A Flatdeck has no notch ! i only know of one that does and it was done after the fact by Gary Kollofski ! |
Originally Posted by cougarman
(Post 3391109)
Curt Ganos 38' 1.62 ratio also,.........not sure if Curts is Wet or dry?
I'm pretty sure Curt's is wet sump. |
Originally Posted by OldSchool
(Post 3391167)
:cool: I'm running that setup as well. It does pull hard in the mid-range!
by the way my windshield turned out pretty good.... |
Originally Posted by Kool-Aid Man
(Post 3392131)
Just curious what speeds/rpm range your calling the mid-range...
by the way my windshield turned out pretty good.... But Curts and Mitchs both in the 90s with with 1.62 ratio and Parnells 41 Saber im pretty sure was a touch over tripple digits with the same gear.. So anything from normal cruising, ............pulling right up to WOT is going to pull very hard and very quick with this gear ratio. The 1.62 acts as a torque multiplier,.....so it adds a nice adrenaline factor to it when you pushing on the sticks. Jon |
Originally Posted by Kool-Aid Man
(Post 3392131)
Just curious what speeds/rpm range your calling the mid-range...
by the way my windshield turned out pretty good.... Good to hear about the windshield. The template worked OK?
Originally Posted by cougarman
(Post 3392476)
Not sure of Oldschools power or speeds.
But Curts and Mitchs both in the 90s with with 1.62 ratio and Parnells 41 Saber im pretty sure was a touch over tripple digits with the same gear.. So anything from normal cruising, ............pulling right up to WOT is going to pull very hard and very quick with this gear ratio. The 1.62 acts as a torque multiplier,.....so it adds a nice adrenaline factor to it when you pushing on the sticks. Jon What power is Curt running. I think that I remember it being 950 Chiefs??? Mid 90's for speeds? |
| All times are GMT -5. The time now is 11:02 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.