Alright, I got them off!!! :evilb: What a b!tch that was! Should have hired a asian midget, I did this with the motors still in :angry-smiley-038:

Here's what I'm working with...

http://i921.photobucket.com/albums/a...s/02ab8fd3.jpg

http://i921.photobucket.com/albums/a...s/5ae152ff.jpg

http://i921.photobucket.com/albums/a...s/f7b18d0e.jpg

1" ball valves going to 1 1/4" hose...aren't the ball valves suppose to be the same diameter as the hose? I haven't had any problems, so I guess I'll just replace what's there. There's also what appears to be an adapter barb in between the valves and hose, probably to take it from 1" to 1 1/4"

Comments are welcome and I'm going to talk to Eric @ Teague and Phil @ Lip Ship, hopefully I can come up with something this week and get this Biatch back in the water before Friday to go watch the Bimini race :drink:

they make them in SS check mcmastercarr.com !