That's kick-azz Kris!!!

I have the dual cooler bellhousings. Standard cooler on the tranny and a Eickert 13 plate cooler on the oil. I run one sea pump.

One of the best if not THE best projects I've ever seen an owner perform himself.

There was nothing on this boat left untouched and it shows in the performance, fit and finish.

I know I give you a hard time, but I'm simply jealous and impressed!!

Kirk
Elite Marine
[email protected]

Kris,

Thank you and Christine for having Stef, the boys and I out. It was a great day. It was cool hangin w/ Joe and Linda again and meeting Rudy and his wife. The boat is incredible. You should be very proud of what you did w/ that thing. What a ripper!!!

Thanks for the comments

Also thanks for all the help on parts. The switch panels turned out great.

Kris

Thanks for coming up, we all had a great time.

Kris

I looked it up. Do you have the 13 plate cooler on both the port and starboard? I noticed that some of the packages comes with a smaller one on one side, and the 13 plate on the other. Kind of pricy, but it may be worth the expense. I assume they are thermacally controlled.

13 on the port and 7 plate for the tranny on the starboard. Run minimum of dash 10 (dash 12 is better) lines with no 90 degree fittings and yes I run the Eickert remote hp-6 style oil filter setup with thermostat. I've had good luck using Canton marine performance oil pans.

Kris