Noise and Neighbors
12-20-2011 | 08:19 PM
#21
Platinum Member
Joined: Oct 2000
Posts: 1,056
Likes: 29
From: Santa Barbara CA. USA
Here is what I did to help the noise situation. It may look strange but it really worked. Sends the exhaust downward and keeps it between the drives and is under water at idle. Had to limit the travel of the drives upward, because if they were allowed to trim all the way up they would crush the pipes that crossed over the face of the gimble.
Last edited by RMPRam; 12-20-2011 at 08:23 PM.
12-20-2011 | 08:56 PM
#22
Registered
Joined: Aug 2007
Posts: 575
Likes: 0
From: LAKE CHARLES, LA
Here is what I did to help the noise situation. It may look strange but it really worked. Sends the exhaust downward and keeps it between the drives and is under water at idle. Had to limit the travel of the drives upward, because if they were allowed to trim all the way up they would crush the pipes that crossed over the face of the gimble.
12-21-2011 | 03:15 AM
#23
VIP Member
Joined: Jul 2003
Posts: 4,282
Likes: 773
From: Tulsa, GLOC
I am w you. That is one of my next projects.
Try some underwater lights too. If they are across the cove, when boat is on lift turn them on!
They wont even be able to look your way.
And dont for get the Tunes.
Try some underwater lights too. If they are across the cove, when boat is on lift turn them on!
They wont even be able to look your way.
And dont for get the Tunes.
12-22-2011 | 06:17 PM
#26
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
