Stellings On Side x Sides
 

Will "GREEN" Stelings fit a 99' top gun, or do most guys only run blacks?

A freind of mine had green on his 96 top gun. Did you get my text?

Green Stellings
 

I found my Stellings application chart. The Green style measurement from the crank centerline upward to the centerline of the collector is 20.25". The horizontal distance from the crank centerline to the outside of the header tube is 16.25" and the horz. distance from the crank centerline to the centerline of the collector is 13.5" They state that the minimum engine center to center dimension is 33". Hope this helps. It seems as if they will fit from what I remember about side-by-side Cigarettes. Let me know if I can help on anything else.

Gary
612-247-7081
__________________

I'll check what color mine are and let you know....

They look like the same as mine black 12degree

I've always liked the looks of them, what is the difference between the green and black, is it performance? or diff alloy?

Green lean forward before sweeping back, longer runners
Black lean directly back.

A Top gun in the classifieds has green headers
Mine has black.

Your so boat/engine smart...lol

Ok Correct Me If Aam Wrong. After Talking With A Few People About Headers, They Have Told Me That My Stainless Marine Gen3 Manifolds will perform better On My Blower Motors Than Headers. But If They Were N/A Motors Headers Would Be A Better Choice Do To Scavaging Reasons. But On A Blower Motor The Exhaust Is Being Pushed Out Due To The Blower. My Stainless Marines Have 2x2 Ports, 4" Collectors And 5" Tails. Seems Like They Would Have Adiquate Flow???

any diff in performance? or theory there of?