Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   Looking at this bullet... (https://www.offshoreonly.com/forums/cigarette/284230-looking-bullet.html)

cig1988 09-07-2012 02:47 AM
Originally Posted by kreed (Post 3770171)
My 92 Bullet ran 82 with 575 a side. Really fun boats. Scream through 3 ftrs all day long.
Hey Kevin
Good talking to you a while back. What size props were you running?

kreed 09-07-2012 06:48 AM
Originally Posted by cig1988 (Post 3771460)
Hey Kevin
Good talking to you a while back. What size props were you running?
You also Stan.... Your boat sounds really nice. I think it should sell pretty quick....I was using 28P Bravo 1 4blades labbed by Bblades. Spinning engines to 5400 RPM.

cig1988 09-09-2012 05:04 AM
Originally Posted by kreed (Post 3771513)
You also Stan.... Your boat sounds really nice. I think it should sell pretty quick....I was using 28P Bravo 1 4blades labbed by Bblades. Spinning engines to 5400 RPM.
That's what my boat is lacking, was thinking of starting with 28's. Never had the chance to prop the boat.

kreed 09-10-2012 09:01 AM
Originally Posted by HIGH PRESSURE (Post 3773327)
Thinking of selling this Bullet
Another nice one!

Screamineagle 09-10-2012 09:45 AM
Nice looking Bullet. You would be hard pressed to find another 31 footer that is better in the rough. You might need bigger tabs on it though...:party-smiley-004:

carter38 09-10-2012 10:24 AM
Originally Posted by HIGH PRESSURE (Post 3773327)
Thinking of selling this Bullet
Nice looking bullet! I've had 4 of them great boats.

eightsecmopar 09-10-2012 02:05 PM
Nice looking Bullet

cig1988 09-11-2012 02:53 AM
3 Attachment(s)
Originally Posted by Screamineagle (Post 3773393)
Nice looking Bullet. You would be hard pressed to find another 31 footer that is better in the rough. You might need bigger tabs on it though...:party-smiley-004:
When I re-rigged the Bullet I chose the 380's...HUGE difference.

Screamineagle 09-11-2012 07:59 AM
I thought about changing my 280's out but was concerned about drive clearence. Yours doesn't look like that would be a problem. Nice looking setup!

cig1988 09-12-2012 03:38 AM
1 Attachment(s)
Originally Posted by Screamineagle (Post 3774159)
I thought about changing my 280's out but was concerned about drive clearence. Yours doesn't look like that would be a problem. Nice looking setup!
Their tapered on the insides. The only problem you'll have is removing the pins from the existing piston and transom plate.


All times are GMT -5. The time now is 03:16 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.