Offshoreonly.com
Page 3 of 7
1
2
3
4
5
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   cigarette flat deck F/S 572's (https://www.offshoreonly.com/forums/cigarette/287547-cigarette-flat-deck-f-s-572s.html)

Unlimited jd 11-16-2012 09:03 PM
Delamination of an old repair, is exactly what the email I got said, also said it was one of the reasons the boat wasn't being used.

FIXX 11-16-2012 10:57 PM
fixx
 
Originally Posted by Conquistador (Post 3816604)
Thanks Jim,
It has been a pleasure talking to you and consumating this deal. :ernaehrung004: Bill
OMG bill,,you bought it,,your cig is going to fly...

FIXX 11-16-2012 11:02 PM
fixx
 
Originally Posted by jaysflatdeck (Post 3816681)
Did PAUL from texas boat repos get it
NO! lets just say that its going to be in good hands,,bill is most likely pulling the engines,,will probably have them inspected,they are low compression engines and if i were bill i would look for a set of 1071's before i put those engines in his 38 tg kevelar hull..

Conquistador 11-17-2012 12:46 AM
Originally Posted by mrfixxall (Post 3816739)
NO! lets just say that its going to be in good hands,,bill is most likely pulling the engines,,will probably have them inspected,they are low compression engines and if i were bill i would look for a set of 1071's before i put those engines in his 38 tg kevelar hull..
Mike,
I have already lined up a friend/mechanic to pull the motors and go through them like Jim suggested (mostly the heads and springs). They are already red to match my Top Gun! Jim's Cig will provide the parts I have needed to bring the Top Gun back to life. The engines are already pushing the power capabilities of the SSM IIIs, so blowers are not likely in my plans. I owe you one on the tip. Onwards, Bill

Full Force 11-17-2012 06:51 AM
Originally Posted by Conquistador (Post 3816758)
Mike,
I have already lined up a friend/mechanic to pull the motors and go through them like Jim suggested (mostly the heads and springs). They are already red to match my Top Gun! Jim's Cig will provide the parts I have needed to bring the Top Gun back to life. The engines are already pushing the power capabilities of the SSM IIIs, so blowers are not likely in my plans. I owe you one on the tip. Onwards, Bill
whats going on with the remainder?

jaysflatdeck 11-17-2012 09:02 AM
witch boat are the motors going into any PICS also any pics around of the 35 STILL SMOKING

Conquistador 11-17-2012 10:46 AM
Originally Posted by Full Force (Post 3816798)
whats going on with the remainder?
It will be a while before I figure out everything. Bill

Langston 11-17-2012 12:55 PM
I can't wait to see it , gonna be a nice project.

Conquistador 11-17-2012 06:07 PM
Originally Posted by Langston (Post 3816943)
I can't wait to see it , gonna be a nice project.
Hi Chad,
I see you now know it is a done deal. I'm hoping to get it here in 2 or 3 weeks, but it depends on a few things. See you soon. Bill

Conquistador 11-17-2012 06:32 PM
1 Attachment(s)
The motors from Jim's boat will be installed in this red 1987 kevlar Top Gun. Bill


All times are GMT -5. The time now is 11:22 AM.
Page 3 of 7
1
2
3
4
5
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.