Nauti by Nature Cigarette 38 Top Gun Refresh!!
#232
Registered
Thread Starter
Join Date: Jun 2011
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
lol thanks Brother!! Give Joe at Fast Forward a call, You just might be surprised with his prices!! He has these blown dual carb engines running like fuel injection!! I have never seen a blown carb engine run this damn good!!
#234
Registered
Thread Starter
Join Date: Jun 2011
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
Lunch Run down the Gulf Coast. We were on our way back from Hooters!
http://www.youtube.com/watch?v=-wuBG4PWEGc&feature=youtu.be
http://www.youtube.com/watch?v=-wuBG4PWEGc&feature=youtu.be
#235
Registered
Thread Starter
Join Date: Jun 2011
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
Getting the boat ready for Key West next month!! Cant wait!!
My not so old Graffrig gauges were full of water, rusted under the lens, and you had to bang on them to get them to work.... Big POS...
So here is the new Livorsi install!!
Nightmare I started with. I can't believe people actually get paid to do work like this... They need to find a new career...
Livorsi uses Deutch connectors!! Just so happens I have been working with them for the last 15 years at Cat!! And have all the tooling!! Perfect!!
Double Wire Crimp to feed the next gauge inline
Wires installed into the connector
Ordered a bunch of connectors to make the install clean!
Building the gauge harness.
Installing the gauges.
All wired up.
Cleaned up the wiring in the boat! Plug and Play now!!
Still have to do the rest of the gauges, will keep you updated. Livorsi has a couple on backorder right now. Also Getting rid of the drivers side GPS (For Now) and putting in a 5"GPS speedo... Thats all i used that GPS for anyways lol to see how fast I was going.
Going to let Glass Dave install one of his dash caps next year... This will have to work for now.
My not so old Graffrig gauges were full of water, rusted under the lens, and you had to bang on them to get them to work.... Big POS...
So here is the new Livorsi install!!
Nightmare I started with. I can't believe people actually get paid to do work like this... They need to find a new career...
Livorsi uses Deutch connectors!! Just so happens I have been working with them for the last 15 years at Cat!! And have all the tooling!! Perfect!!
Double Wire Crimp to feed the next gauge inline
Wires installed into the connector
Ordered a bunch of connectors to make the install clean!
Building the gauge harness.
Installing the gauges.
All wired up.
Cleaned up the wiring in the boat! Plug and Play now!!
Still have to do the rest of the gauges, will keep you updated. Livorsi has a couple on backorder right now. Also Getting rid of the drivers side GPS (For Now) and putting in a 5"GPS speedo... Thats all i used that GPS for anyways lol to see how fast I was going.
Going to let Glass Dave install one of his dash caps next year... This will have to work for now.
#237
Registered
Thread Starter
Join Date: Jun 2011
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
I ended up leaving in 2007 after about 15 years.. I sell Real Estate now!! Imagine that lol