And you damn sure aren't going to ever make any real power with shelf cams LMFAO!!!

Wow touchy little guy aren`t ya.

Not sure why you brought mild in here but hes been running his for 4 seasons now trouble free.
Maybe your engines will last longer then a year this time around? This will be my first "all me" build so we shall see.
Good luck with your high lift short duration valvetrain killing super duper "custom" cams thou, they`ve worked out so good for so many people. lol

We have no clue says the guy who needs bob to design his cam, Joe irwin to build and tune his engine :lolhit:

1400-1500 pump gas motors are nothing new shows you really don`t have much clue about the limits of octane and cylinder heat and pressure but good luck with that.

Says the guy who thinks long duration and low lift is harder than short duration high lift cams. Lmao

2 engine meltdowns from a "faulty warning switch alarm" ...lmao!

Did Bob Madera give you the ok to bad wrap me ? Should i start posting all the info on how on at least half a dozen engines on the dyno, that actuslly made MORE power, when his cams were removed for an off the shelf lunati cam?? Engines built by some very well known marine engine builders. You think your cam guy is a god, and those who actually know wtf they are talking about, think he's a joke.

Such an angry little man you are. If you truly think, you cant make power with a cam that is a shelf stocked item, whether at crane, comp, lunati, howards, crower, and so on, well, then the joke is on you.

Can't be done says the shelf cam guru on oso.... You two must wake up and suck each other off


https://www.youtube.com/watch?v=0VvOBYEA2dQ

I never said it couldnt be done. Anybody can make power on a dyno pull. My buddys 522 made 1298hp on pump gas with a m4 procharger on the dyno. Making it last in an offshore boat is another thing. Steve morris been making big numbers on pump, as well as many others. Whats the point ?

Obviously you two azz hats haven't scrolled through the entire build thread, if you had you would have realized that the engines where built in our garage!!! Mark sent weeks designing the Cams with software then called Bob, sorry we don't have a lathe to grind it ourselves....next birthday I will be sure to buy him one just so you too jokers can shut the FU! Pretty sure that Bob doesn't sell Pac racing valve train component., again all specked by Mark. Yes Joe tuned the first set of engines and ZP helped this time, sorry my husband is an EFI wizard and doesn't play with carb. And before your to smart azz jokers say I don't know what Im talking about think again, I was out there helping from the start! Karma is a bit*h, hope you don't have any overheating/engine issues!!!

Whats the point??? "1400-1500 pump gas motors are nothing new shows you really don`t have much clue about the limits of octane and cylinder heat and pressure but good luck with that."

Why don't you two go phuck up someone else's thread.. If your budget is worried about sh!t lasting maybe you should go buy a pontoon boat.....

Is this a Facebook beef I don't know about cause I don't subscribe. I'm sure this is only keyboard drama or did you all meet on a dock somewhere?

I have not posted on this thread at all, but for some reason, Mrs mmb felt the need to call me out, and call me an azzhat. Because someone else questioned their engine idea.

No its about those 2 ruining every thread on OSO with thier garbage knowlege of engines. Everyone on this forum is tired of it...