Nauti by Nature Cigarette 38 Top Gun Refresh!!
05-21-2016 | 07:38 AM
#382
Registered
Joined: Jun 2012
Posts: 424
Likes: 8
From: Lake Lanier Ga.
You had to wade pretty deep to get some of those pics in some chilly water Mark, LOL
05-21-2016 | 08:39 AM
#383
Registered
Joined: Jun 2009
Posts: 9,969
Likes: 6,460
From: Chicago
I`m just mad cause our season is 2 weeks long, I`m still in the garage assembling 2nd motor , I won`t make any power with an off the shelf cam, I still need to build two 4 cylinder engines to power my roots blowers and I`m stuck in a half car garage!
Enjoy your boating Jerk!
Enjoy your boating Jerk!
05-21-2016 | 09:24 AM
#384
Registered
Joined: Nov 2007
Posts: 4,029
Likes: 510
From: Cleveland, Ohio
We had 80hrs on the old engines... Overheat doesnt really count as a 2-3 hour redo/blowup... Things happen with these boats. I already have 10 hours on the new ones. I rebuilt the entire boat last year, mechanical and electrical!! We spent $58,000 on this old thing last year and its finally getting to the standards I want it to be at!!
New Exhaust & Tail Pipes
New Trans Planetaries
New Engines
New Carbs
New Engine Accesory Brackets
New Painted Valve Covers
New Wiring Harnesses Boat
New Wiring Harnesses Engines
New Bilge Fans
New GPS' Units both sides
New 2 5/8 Gauges
New Trim Cables
New Tab Cables
New Switches
New Carbon Dash Panels
New Glass Dave Hatch
New Glass Dave Dash Caps
New Water Lines
New Fuel Lines
New Sea Pumps
New 13 Plate Engine Coolers
New 9 Plate Trans Coolers
New Hardin Bellhousings
New Starters
New Fuel Pumps Electrical
New Circuit Breakers
New MSD Distributor Ignitions
New Stereo
New Led Speakers & Subs
Items Already done in 2016
New Steering Cylinder Rebuilds
Extra Mega Blower
New Props
New Anchors & Lines
New 60x24 Garage going up
Happy to hear yours is running great! Im glad you were able to build your engines again and use your boat for a few hours while I did all the above!!
New Exhaust & Tail Pipes
New Trans Planetaries
New Engines
New Carbs
New Engine Accesory Brackets
New Painted Valve Covers
New Wiring Harnesses Boat
New Wiring Harnesses Engines
New Bilge Fans
New GPS' Units both sides
New 2 5/8 Gauges
New Trim Cables
New Tab Cables
New Switches
New Carbon Dash Panels
New Glass Dave Hatch
New Glass Dave Dash Caps
New Water Lines
New Fuel Lines
New Sea Pumps
New 13 Plate Engine Coolers
New 9 Plate Trans Coolers
New Hardin Bellhousings
New Starters
New Fuel Pumps Electrical
New Circuit Breakers
New MSD Distributor Ignitions
New Stereo
New Led Speakers & Subs
Items Already done in 2016
New Steering Cylinder Rebuilds
Extra Mega Blower
New Props
New Anchors & Lines
New 60x24 Garage going up
Happy to hear yours is running great! Im glad you were able to build your engines again and use your boat for a few hours while I did all the above!!
This back and forth seems to be out of season. The lake is thawed up here, let's run these things.
05-22-2016 | 04:46 PM
#387
Thread Starter
Registered
Joined: Jun 2011
Posts: 863
Likes: 0
Much better with the 30 Maximus 5 Blades. Cruise speed came up 5-6mph but I can spin them to 5800 no problem at all. ZP is going order me some 32 Maximus 5 blades! Should be almost perfect then!
Thank you ZP for helping me get the props dialed in!!
Thank you ZP for helping me get the props dialed in!!
06-05-2016 | 09:13 AM
#388
Thread Starter
Registered
Joined: Jun 2011
Posts: 863
Likes: 0
Dragging the tabs a little in the pic to get rid of the flat water hop. But it is 60mph at 3500rpm's now with the new props!! The new props threw my carb tune off so now I get to go through that again. Ordering more jets and air bleeds until my 02 sensor is happy.....
Thanks for the help ZP you definitely know how to make these old Cigarettes pick up big time in the cruise department!! That was a 16mph gain at 3500 from the old props!!
Thanks for the help ZP you definitely know how to make these old Cigarettes pick up big time in the cruise department!! That was a 16mph gain at 3500 from the old props!!
