![]() |
Dave, Lane, and Bev know a thing or two about Cigarette interior. They took my 28 with basically nothing to start with and made it look like a Top Gun JUST by looking at a bunch of pictures.
|
I can't believe your gonna change it... Love that color combo!!
|
Originally Posted by Full Force
(Post 3891813)
Did some moving of my amps, still have to install the JL 1000/1 yt but this is start, there will be a cover made later to cover wiring showing just the face of amps...
http://i1276.photobucket.com/albums/...ps239c7bb8.jpg Make sure you install two brushless 12v fans in your cover, one pulling air in, one pulling air out on the opposite end. |
Thx !
The cover will only show face and heat sinks if I can fit fans I will gonna be tight one good thing is the cabin will have ac so that will help over the little closet the amps used to be in... Too bad the amps are not all same year they are same size just look a little different.. Oh well I already own them lol |
Originally Posted by THRILLSEEKER
(Post 3892015)
Dave, Lane, and Bev know a thing or two about Cigarette interior. They took my 28 with basically nothing to start with and made it look like a Top Gun JUST by looking at a bunch of pictures.
|
Trying to get the wife envolved with the boat. She likes the boat but can't stand the gray. It will put me back a few but she is having one of her painters do the work!!!!!
|
Originally Posted by Drake22.250
(Post 3892006)
Tim, Looking great. Dave is going to be a pro at Mistress Cig's. Just stripped my hull getting ready for paint. Figured if we were going to change the colors made sense to do before new interior.
Also, update me on your time frame on bringing the boat here. XT |
4 Attachment(s)
Mounting any 10" sub in 1/4" fiberglass is nothing but a rattle trap and a waste. Now glass 3/4" plywood on both sides and bond it all together and mount it in the deck as tight as possible with (4) 10" subs and now we are talking THUMP!
XT |
Originally Posted by XT-Innovator
(Post 3892605)
Email me a address and I can send you vinyl samples that your painter can match. Much easier to match paint to vinyl, than vinyl to paint. Ask Tim about the demo I gave him on the stain guard between a couple different marine white vinyls. Best to stay with vinyl products that I know and trust.
Also, update me on your time frame on bringing the boat here. XT |
Originally Posted by XT-Innovator
(Post 3892620)
Mounting any 10" sub in 1/4" fiberglass is nothing but a rattle trap and a waste. Now glass 3/4" plywood on both sides and bond it all together and mount it in the deck as tight as possible with (4) 10" subs and now we are talking THUMP!
XT |
| All times are GMT -5. The time now is 09:25 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.