![]() |
Currently I have - 2 sport masters with a 1 inch spacer, you think I should try a 2 inch spacer? Did your 4 blades have a decent hole shot?
|
Originally Posted by Peter Lott
(Post 3892754)
Currently I have - 2 sport masters with a 1 inch spacer, you think I should try a 2 inch spacer? Did your 4 blades have a decent hole shot?
|
I can only get my 525 Glad up to 85 MPH at 5100 RPM. I am at a lake at 2,060 feet elevation. How much difference if any do you think that would make? I assume it loses some power with altitude since its not supercharged. I do have Herrings on it already.
Originally Posted by OL40SVX
(Post 3875988)
A 525 Glad runs about 92-93 mph...
|
The fastest Glad 525 staggered props are 4 blade 34's. The trade off is that they are not so good gettting on plane. My 30 6 blade Herings jump right on plane, but you lose 1-2 mph at the top end.
|
my will hit the water this week new motors 555 w/ whipples still need to change props I have the old 4 blade 32 for now will need help there just a place to start.....I will take all the help I can this prop thing is over my head
|
Originally Posted by trannyjoe
(Post 3971594)
my will hit the water this week new motors 555 w/ whipples still need to change props I have the old 4 blade 32 for now will need help there just a place to start.....I will take all the help I can this prop thing is over my head
|
I Hope Not ^^^^^^
|
With 32,s you will hit the rev limiters way too soon on a stock 525 boat
|
I am looking for a "in new condition" pair of 32's. or, would be willing to trade a brand new set of 30's that were on the boat 1x.
|
still have the xr drives and did not dyno the motors just had know time will hit the water this week with 500 efi and 4 blade 32 I ran 85
|
| All times are GMT -5. The time now is 08:36 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.