Just bought 46 had tripples took out and putting 1200 staggard was wandering prop sizes recommended. Top speed , cruising speeds.

302sport had a 42 with 1200 cobras - he could at least give you a decent guess on where to start I'd bet.

Boat would run 120-122 at 6200 very light on fuel and people
Last time I took the boat out in the fall I saw 117 on the GPS with 9 people and a half tank.
I would normally cruise @3800-4000 and run high 70's to 80 depending on trim.
Would peg the limiters with 40's on so switched gears and dropped to 17x33 five blades and the boat ran amazing.

Which 46 did you get? most of the 46's with staggered 1075's are in the 102-110 range from what I recall, depends on cover-girl or half cover-girl cabin as well as some other amenities. I looked at a few of the triple bravo boats with thought of doing what you are doing, very cool and lots of work. also double check with either Phil or the factory to see if there is any diff in the deck configuration for a triple vs a stagger, like if the engine room is bigger, smaller cockpit, or shortened deck. post some pics.

Thanks for all the info. I hope we have it completed by middle of june. Thats our goal. New interior total refit , new everything. Wish us luck as this will be our 4th and final project x I will guess. Also to answer which boat well all I know is it belonged to a music producer or something it got stripped and boat sat for 3 or 4 yrs. Will post pics of the project. Trying to post transome it was filled, cut and re all gripped this week. Begining of next week comes the goodies.... Will post as we are completing them.

Are you on lake Hartwell? Seen Tanner lately? Good luck on your 46.

that's awesome, love projects like that. I don't believe other than the obvious triple vs staggered stuff (2 vs 3 of everything rigging related) that the decks and such were different, obviously stringers in the bilge will need to be redone and check for proper x dim. cant wait to see the pics!

Being done by RF in North Carolina right?

Yes all of it is being done at RF... oh Nick waz wondering where you were.. call me sometime..

Is he doing any bottom work, and do the motors make a real 1200??? I'm interested to Ser how fast a 46 cig setup by Reggie will be compared to the rest...