the port side dash comes out pretty easy, just pull all the 1/4-20 screws and that side pops right out. it also gives easy access to the door and slider rails. couple screws and those are out as well. The stbd helm on the other hand is kind of a pain but in the grand scheme of things its easier pulling then trying to deal with refinishing it in the boat. Both are set in a heavy bead of silicone and that has to be removed for good results. The upper section of the helm is also glassed in and needs to be cut, mostly its just tabbing around the gauge area. Its well worth the effort.

For Frickstyles boat I did a set of dash caps that emulate the look of the newer Guns and have molds. it basically caps right over the old dash with the removal of the compass riser.