ill be needing a set of these pretty soon. ill luk when ill order em!

you be needing some license plates for the front of the rig and trailer, a billet engine hatch arm, the knob thingys for the deck hatches, and some other cool stuff we have coming out in the near future. i can hook you up on shipping cus im in syracuse quite a bit

Haha, think i just need the hatch knobs. might take a license plate depending on how my budget is going when it comes the time... haha

Looks great!

just got a bunch of stuff back from anodizing last night. i wish powdercoat worked better than it does cus the anodizing shop is the slowest on the planet!!! but never the less the piece that got done this morning came out great. its a power steering reservoir bracket for member YSCHMIDT
[ATTACH=CONFIG]520735[/ATTACH]

Foot rest pix & prices yet?

not yet they are coming soon cus i need a set for my boat too!

did another big sign with a little different design

[ATTACH=CONFIG]520750[/ATTACH][ATTACH=CONFIG]520751[/ATTACH]

Well a little Mother mag polish and some lag bolts and it hung on the wall in the Man Cave

Got myself some bling too , anodized and all ...real nice work 88bullets!

http://33outlaw.zenfolio.com/img/s8/...40782750-3.jpg



http://33outlaw.zenfolio.com/img/s5/...62336485-3.jpg

red license plate
[ATTACH=CONFIG]521197[/ATTACH]

Nice!!!!!!!! you know the address to send it to. LOL

Mark :lolhit:

Are the hatch latches still available? Interested in a couple.

Buck

me too

5'sonboxes is the guy that was making them. Try shooting him a pm to see if he still is. Haven't talked to him in a while

Bump to find out if I can buy the hatch hold downs? I would need all four please let me know.

Hey guys, I'm going to go ahead and make 4 sets of these at my shop (the hatch hold down levers). Should I run some more, like another couple sets? Any interest and I will go ahead and machine. No idea on price, not trying to make money here, just trying to help out. If we're setting up to make 4, setup costs trump running off another 8 pieces, so no big deal. Let me know by replying to this post. .

I may be interested in a set. Sent you PM.

Any chance you are still making these? Would like a black anodized one.

Interested

I would like a set, and a license plate if you are machining them as well (Black)

I am not the original guy who was making these, so no license plate from me.

I am setup to make 16pcs, 4 for me. Counting the two who showed interest, 12 are spoken for. I can just as easily make 20 if needed. No clue on price, but I will be fair.

Sorry for the confusion. I think 88bullet made the license plates. Hopefully he will respond if he still makes them or still has some available...

Yep, that's the guy you want to contact for the plates.

5sonboxes made the plates and he isn't doing them any more, but I have one that I'll sell for 1,000,000.00:eekdrop:

Frickstyle - It looks like you tried posting a message about the latches but nothing is showing up. I tried to PM you and received an error message that your inbox is full. How did they turn out? Pics?

They came out good, but I think we missed something here. We may have to modify what we have because in the "closed" position, the latch doesn't stick above the swing bolt shoulder portion of the fastener. I'm going to see if we can save these. I didn't realize that until I posted the picture, and I then confirmed it this weekend when I put them in the hatches. You may be able to see what I'm trying to explain here:

[ATTACH=CONFIG]556973[/ATTACH]

I'll update this post when we have a green light. I still have you on my list for the first set or two.

OK, these should work now. Looks like the latch will work in the closed position. I could never recoup my cost on these, but since I was running them, we made a few extra for people who needed them. Just trying to help out.

You will need to supply or re-use your old washers, I do not have them. The correct assembly would be 1/4" - stainless washer + rubber washer + stainless washer.

[ATTACH=CONFIG]557014[/ATTACH] [ATTACH=CONFIG]557015[/ATTACH]

$35.00ea, or qty 4 - $125.00

I have 3 sets to sell, there are already two people that have interest, so PM me if interested and I'll let you know. Also, these are not perfect, a couple came out with tooling marks (see picture). I am losing money on these, so therefore, all sales final, no complaining.

[ATTACH=CONFIG]557016[/ATTACH]

JJ - do you still need some of these?

How about belt buckles?

PM Sent Frick