Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   Cafe Stringer Layout (https://www.offshoreonly.com/forums/cigarette/313184-cafe-stringer-layout.html)

242LS 06-02-2014 02:03 PM

Cafe Stringer Layout
 
Does anyone have a diagram or pic of the stringer/compartment layout on a Cafe under the cockpit floor?

I found the ~2'x2'x10" compartment under the helm/steering wheel that holds the macerator pump/plumbing was not draining into the bilge. I siphoned it out and found the drain was not blocked, but appeared to have water in the compartment under that. Need to find the drain hole to remove debris/unclog.

Thanks.

Full Force 06-02-2014 10:21 PM

if its like my Mistress there is a 4-5 bulkheads under floor.....good luck...

315duramax 06-04-2014 07:21 PM

yup. my floors off right noww send me a text and ill snap some pics for you right now. 3152473146

242LS 06-04-2014 07:58 PM

1 Attachment(s)
Txt sent. Thanks. I was just about to go to Home Depot and buy an inspection camera....

[ATTACH=CONFIG]524282[/ATTACH]

242LS 06-06-2014 06:11 AM

2 Attachment(s)
Thanks for the pix Dmax. Posting here for others in the future....

[ATTACH=CONFIG]524351[/ATTACH][ATTACH=CONFIG]524352[/ATTACH]

Full Force 06-06-2014 08:17 AM


Originally Posted by 242LS (Post 4133595)
Thanks for the pix Dmax. Posting here for others in the future....

[ATTACH=CONFIG]524351[/ATTACH][ATTACH=CONFIG]524352[/ATTACH]

Looks like his project turned into a little more.....

Unlimited jd 06-06-2014 08:23 AM

C'mon don't turn this thread. He actually did something useful without being a cocky prick. Feel free on the other thread lol

Full Force 06-06-2014 08:27 AM

I'm not lol just saying...

Is the whole floor removeable on a café? my Mistress I can remove center but would have to cut around edges...

Unlimited jd 06-06-2014 08:37 AM

I thought it was the center and 2 other small panels. 315 did some cutting or I haven't paid close enough attention

Full Force 06-06-2014 08:41 AM

hope I never have a reason to cut mine lol


All times are GMT -5. The time now is 11:16 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.