Offshoreonly.com
Page 3 of 4
1
2
3
4
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   Top Gun Compass (https://www.offshoreonly.com/forums/cigarette/317562-top-gun-compass.html)

jmackin 09-04-2014 03:19 PM
Originally Posted by Tom A. (Post 4183066)
Quick easy replacement and update:

https://www.donzidirect.com/clearanc...hite-1000.html

BTW, those panels you made Dave are an awesome upgrade!
This is what i have and it is awesome. Much quicker and easier.

glassdave 09-04-2014 03:23 PM
1 Attachment(s)
Originally Posted by plumbers crack (Post 4183047)
I was thinking the same thing Dave, multiple brakets. BTW the acrylic/plexi is rough cut? or is it sanded and ready to go? Im in if its ready to rock.
the edge is finished all the way around but the bottom may require a bit of fitting to your boat, just depends how snug ya want it. I put a general bevel on the bottom edge but all the ones i have done needed to be fit per boat and per brackets, same with the holes. Its somewhat "advanced do-it-yourselfer" but thats what most boat owners are here anyways :D :cool:

plumbers crack 09-04-2014 09:13 PM
I heard it should be shimmed so it doesnt squeak do you put a small amount of silicone on the bottom ? I guess the rain would sit in there if you did so maybe every couple inches?

DirtyMoney 09-04-2014 10:48 PM
1 Attachment(s)
I put in a cup holder

mrpickett357 09-05-2014 10:34 PM
1 Attachment(s)
[ATTACH=CONFIG]528836[/ATTACH]


Before

mrpickett357 09-05-2014 10:43 PM
2 Attachment(s)
[ATTACH=CONFIG]528837[/ATTACH][ATTACH=CONFIG]528838[/ATTACH]

After

plumbers crack 09-06-2014 03:16 PM
Originally Posted by mrpickett357 (Post 4183835)
[ATTACH=CONFIG]528837[/ATTACH][ATTACH=CONFIG]528838[/ATTACH]

After
Nice job, did you buy or make the gps bezel

twinscrews 09-07-2014 05:57 AM
Originally Posted by mrpickett357 (Post 4183835)
[ATTACH=CONFIG]528837[/ATTACH][ATTACH=CONFIG]528838[/ATTACH]

After
Very nice

mrpickett357 09-13-2014 08:24 PM
2 Attachment(s)
During the restoration of Lock & Load we moved the compass to the port side dash and fabricated the GPS as a built in part of the new helm. [ATTACH=CONFIG]529514[/ATTACH][ATTACH=CONFIG]529515[/ATTACH] Zero Patience built the bracket in aluminum using cardboard mock up made to get the angle right.

Flamingo 42 09-13-2014 11:31 PM
1 Attachment(s)
My compass doesn't work and is dash mounted, I checked with Richie and it's obsolete with no replacement available...any ideas


All times are GMT -5. The time now is 07:58 AM.
Page 3 of 4
1
2
3
4
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.