|
You live and learn guys, in the end I am the person that has to deal with my learning hurts, it is heart wrenching to deal with what I am, but I will get past it. Some of you guys know me personally and know I spent a very intense about of time and money to make sure this went ok, that hurts to see me with engine blocks bare tonight, I don't need some know it all telling me what I did wrong when he don't know the behind the scenes of the whole deal from day1
I am not wealthy, college educated, or gifted with good luck, but I am gifted with a drive to succeed if that comes with some failures so be it... At least I tried and will do everything I can to be the best I can be..... If that don't please people.... Then fuk em, theyvare not my problem to worry about, I am... |
Tim, any thoughts of starting a repower 3 with SBF engines? I could set you up with a guy that has built some offshore ford engines! Thx
|
Originally Posted by Full Force
(Post 4312442)
You live and learn guys, in the end I am the person that has to deal with my learning hurts, it is heart wrenching to deal with what I am, but I will get past it. Some of you guys know me personally and know I spent a very intense about of time and money to make sure this went ok, that hurts to see me with engine blocks bare tonight, I don't need some know it all telling me what I did wrong when he don't know the behind the scenes of the whole deal from day1
I am not wealthy, college educated, or gifted with good luck, but I am gifted with a drive to succeed if that comes with some failures so be it... At least I tried and will do everything I can to be the best I can be..... If that don't please people.... Then fuk em, theyvare not my problem to worry about, I am... Calvin Coolidge |
Originally Posted by Thunder mild
(Post 4312459)
Tim, any thoughts of starting a repower 3 with SBF engines? I could set you up with a guy that has built some offshore ford engines! Thx
|
Originally Posted by abones
(Post 4312469)
I know I'm dyslexic but Sh$t I must have had to much Vodka or not enough Vodka!
|
Stop the profanity and read the OSO terms of use if you are unclear about them.
You agree, through your use of this service, that you will not use this Website to post any material which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise violative of any law. We reserve the right to suspend, ban, or block access to any free or paid member deemed harassing other members, moderators, administrators, advertisers, or vendors, with or without warning |
All in all your lifter bore was off and too tight and bit you in the azz. . Valve guide tolerance's were a little tight but were not the engines down fall.
Correct ? |
Originally Posted by Full Force
(Post 4312377)
Hey AZZHOLE, I never said I had no faults, I DID check the clearances, I addressed the question and did what I did, if you think I conned anyone you can go fuk yourself in your own azz with no assembly lube, I don't give a fuk what you think and how stupid you think I am, again, I did this and will deal with it... I am so glad you never fuk up, you are perfect, I hope you feel good about yourself.... fuk you, and fuk you again, go fuk yourself, you don't know ****....I can't wait till the day com es you fuk up, you would hide it so you feel ok, no get the fuk off my thread if you don't wanna say anything constructive... azzhole...
you are the ONLY negative person in this thread, shows who you are..... BTW did I remember to say FUK YOU? lol Now take a long hard look at this thread and learn the Devil is in the Detail's my friend http://www.offshoreonly.com/forums/c...n-refresh.html |
Originally Posted by tommymonza
(Post 4312501)
All in all your lifter bore was off and too tight and bit you in the azz. . Valve guide tolerance's were a little tight but were not the engines down fall.
Correct ? |
Originally Posted by Griff
(Post 4312494)
Stop the profanity and read the OSO terms of use if you are unclear about them.
You agree, through your use of this service, that you will not use this Website to post any material which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise violative of any law. We reserve the right to suspend, ban, or block access to any free or paid member deemed harassing other members, moderators, administrators, advertisers, or vendors, with or without warning |
| All times are GMT -5. The time now is 04:49 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.