any one looking for the white out table and cooler kit? the cooler top is great, the table top has a small chip about the size of a quarter on the back (free board) corner from trying to get it loose. man they use a lot of glue on those things. i also have other cabin interior parts. best offer.

todd

You stripping your cabin out? Going F-2 status or what?

Tank, your slipping bro.... it has been stripped... This was covered in a few threads a while back...

hey tank

hope all is well. yes cut the cabin out a couple of years ago. i heard it is about 1,100lbs. reglassed the front bulkhead/storage compartment in, added 4 more bulkheads, about 300lbs so lost about 800lbs after it was all done. mrs baron is not real happy with that move. but the topper for her was losing the sun pad to hood scoops. the ride difference is unbelievable.

todd

Mph before and after?

Lol. You guys are funny. I can't keep track of EVERYTHING.


Let's see the pics!!

Interested in the cooler lid. How much you asking

I'm looking for the 3 glass, square, decanters that over the cooler lid if you might have them.

What do you want for the entire kit. Door surround, table top and cooler top

joe i was doing motors at the same time. so lot of testing and problems. i did put the old motors back in late in the season but never hooked up the speedo in the reinstall, but running with the normal crowd i go with i would say maybe 3mph? with the old motors back in. carriers the bow much better and handles 10 fold better. did i mention stuff as heck. only has 1 rattle in it and it is the darn cabin door. that is on my spring list.

todd