Tiger upgrades
#162
VIP Member
VIP Member
Thread Starter
I did, i stayed with the xr as they were supposedly faster than the scx lower, however they should have given a little more speed and they were very deep, so i went with the sc -2 as it is faster than the SCX, i will check the gears and as long as i am not tearing them up i will stick with it. it really freed the hull up and got me the rpms i needed, but half inch down should bring the bow up more even though i am already turning in.
#163
Registered
iTrader: (3)
I did, i stayed with the xr as they were supposedly faster than the scx lower, however they should have given a little more speed and they were very deep, so i went with the sc -2 as it is faster than the SCX, i will check the gears and as long as i am not tearing them up i will stick with it. it really freed the hull up and got me the rpms i needed, but half inch down should bring the bow up more even though i am already turning in.
#164
VIP Member
VIP Member
Thread Starter
I agree, and as long as I dont start tearing up gears i will use them, or if I do ill go scx and have wilson do them
#167
VIP Member
VIP Member
Thread Starter
may want to get the imcos he has on his zrc when he does the upgrades. if yours has a notch it could help it.
#170
VIP Member
VIP Member
Thread Starter
Thank you, its just time for something different, the original owner did this and he had his twin step done the same (minor differences)... The deck is now faded and chalky, But I am going to have Richy Rich do a custom job, that will make it look like a newer model and he has some artistic freedom to make it look even better, still going to be orange.. after all it is "The Orange Palace"