![]() |
Looking sharp... the yellow orange red fade is simply a timeless classic that never goes out of style.
|
I like that shade of green you used. Boat looks fantastic!
|
8 Attachment(s)
Ive had a few people ask me about the time frame for this, and the simple answer is there were lots of stress cracks to fix and lots of details that Richy tends to obsess about. these are the speaker covers and the grab rails. Also all new gauges and repainting the dash panels, also needed to make a new dash panel as I upgraded to a Garmin92 series touch screen, did a compass delete and the new GPS speedo has a compass built in... Should be going to rigging today... Ive had the complete interior vinyl up here as well at Valentine Upholstery, Brandon is the best in MD, so when the boat comes back we can get that in. I'm doing the sun-pad in a more firm foam and raising it to be flush with the sides of the hatch, that was something from original that always bothered me.
|
Very Nice!!!
|
Originally Posted by offshoredrillin
(Post 4562864)
Ive had a few people ask me about the time frame for this, and the simple answer is there were lots of stress cracks to fix and lots of details that Richy tends to obsess about. these are the speaker covers and the grab rails. Also all new gauges and repainting the dash panels, also needed to make a new dash panel as I upgraded to a Garmin92 series touch screen, did a compass delete and the new GPS speedo has a compass built in... Should be going to rigging today... Ive had the complete interior vinyl up here as well at Valentine Upholstery, Brandon is the best in MD, so when the boat comes back we can get that in. I'm doing the sun-pad in a more firm foam and raising it to be flush with the sides of the hatch, that was something from original that always bothered me.
|
Really, REALLY nice Rob!
|
4 Attachment(s)
Here are the dash panels, its over at Ropers now getting re rigged, should be ready to be picked up in about a week, then back to MD for upholstery...
|
3 Attachment(s)
Roper loading the panels and straightening out 17 years of many hands messing with wiring under the panels...all gauge panels will have new pigtails and go to a central plug under each panel. that way if I have to remove a panel i simply undo it and unplug it and can pull it away. along with controlling the power it does away with multiple grounds and chances of one gauge or wire not being connected. the first pic is many diff stereo "experts" work
|
Any updates?
|
7 Attachment(s)
Originally Posted by CigaretteSam
(Post 4599931)
Any updates?
|
| All times are GMT -5. The time now is 08:55 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.