|
I wouldn't think the spaces will be needed either. I noticed no difference getting on plane w mine w/o the spacers.
Come on Spring https://cimg9.ibsrv.net/gimg/www.off...67b5a95e73.jpg |
Originally Posted by Quinlan
(Post 4669257)
I wouldn't think the spaces will be needed either. I noticed no difference getting on plane w mine w/o the spacers.
Come on Spring https://cimg9.ibsrv.net/gimg/www.off...67b5a95e73.jpg |
Originally Posted by offshoredrillin
(Post 4668677)
thanks guys... i have seen tons of boats, but i have to say to look down the side you really see how bad some molds are. Cig nailed this one and Andys guys in their prep work have made it smooth as glass. I cant wait to get Ceramic coating on it and really get the pearls to pop. I'm also going to coat the new awlgrip bottom that was done by Mark at Rage.
|
Originally Posted by scarabman
(Post 4670949)
What ceramic coat are you using, if you dont mind me asking? Trying to get a little education on them, as I am thinking about doing it on my Red gel cruiser to try and stop fading/oxidation?
|
Thanks. Both of those have to be certified installer applied, correct? Any recommendation for a diy product?
|
Originally Posted by scarabman
(Post 4671073)
Thanks. Both of those have to be certified installer applied, correct? Any recommendation for a diy product?
|
Originally Posted by offshoredrillin
(Post 4669072)
No I dont, i only had it out a few times so Its not fully dialed in yet, w 30's I was hitting rev limiter at 92 mph, tried 32 labs wmf had for his ts and it didnt like them, so im going to try bretts 32 4 speeds as well as the 30 and see how it runs.. i do have 1/2 inch spacers if needed... going to see how it is with those then putting smaller pulleys on going from 7 to 9lbs and tuning with FU marine.
In the meantime, you got the old video! |
https://cimg7.ibsrv.net/gimg/www.off...24c9cbd5a1.jpg
been a while since i updated, new fusion and bluave stereo as well as new cockpit and sunpad upholstery... |
all the fusion stereo components are made by garmin so are 100% interface-able with the GPS, getting all the NEMA hookups done.. when they took all the wiring out from the previous systems, Mitch said it was about 100 lbs of wire, from at least 5 diff systems and diff people working on it over the years, i only put one in. there were some speaker wires that were run with power wires and some laying on top of power, no wonder I had alternator noise in the stereo.https://cimg4.ibsrv.net/gimg/www.off...efb19e72b8.jpg
|
Hey OD...I saw your Cigarette yesterday at MDO. Stunning paint...absolutely amazing to see in person!
|
| All times are GMT -5. The time now is 03:19 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.