![]() |
Quote Originally Posted by 78CIG24 View Post CEN = Carr Enterprises, 4780 96TH ST N, St Petersburg FL 33708 Date business started was 1/15/1979 Cheers, Dave Thank you Dave. That’s what I’ve found out too. Unfortunately, they’re no longer in business or I would contact them. http://www.mycarrenterprise.com/ 727-688-0645 |
Originally Posted by Batmans
(Post 4286785)
If you honestly believe this boat is home-made you are an amateur in the boat community.
You call someone out on knowledge but you say your boat has TRS drives. Hummmmmmmmmm. Here's the back of your supposed boat that supposedly just needs a repaint and interior. Might want to look at these drives again while your looking at these pics that show it needs a little more than a fluff and buff. http://i961.photobucket.com/albums/a...ps1xngu5rl.jpg |
That came out small.
Much larger pics found here: http://www.thehulltruth.com/boating-...ml#post7712873 |
Phragle, could this possibly be your buddy Darr posting this stuff ?
|
|
Originally Posted by SB
(Post 4286879)
I'm calling BS on this whole thing. ie: You and the boat.
You call someone out on knowledge but you say your boat has TRS drives. Hummmmmmmmmm. Here's the back of your supposed boat that supposedly just needs a repaint and interior. Might want to look at these drives again while your looking at these pics that show it needs a little more than a fluff and buff. http://i961.photobucket.com/albums/a...ps1xngu5rl.jpg For those who actually took the time to respond with useful information, thank you. It's much appreciated. Good day, Tiffany |
Originally Posted by SB
(Post 4286886)
Phragle, could this possibly be your buddy Darr posting this stuff ?
|
Originally Posted by phragle
(Post 4286997)
It is odd, a lot of knowledge and very little knowledge at the same time.. If she is ligit, she has bigger balls than I, taking on that project.
To Tiffany, go get em! |
Originally Posted by scarabman
(Post 4287005)
Uummm.........if she is legit, I hope she has no balls at all. If she does, she is a he. I only mention this since this thread is about something, that is actually something else.:bananalove:
To Tiffany, go get em! |
Originally Posted by RebarBox
(Post 4285878)
Freeboard looks a little to tall to me to be a 28. Vin does not lie. Rear, right side, maybe 4" below rub rail - should start with CRT.
Originally Posted by Batmans
(Post 4285925)
What's a freeboard? Also, it says Chrysler Marine on the transom assembly.
=============================== Anyone notice , easier to see in the larger pics in link I provided earlier, that the engine cover and deck have been raised with plexiglass and what looks to be channel iron ? Very strange / different to say the least. |
| All times are GMT -5. The time now is 10:45 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.