38"PITCH ? :eekdrop:

Sorry 32 pitch - wasnt paying attention to what I typed! 15.25 diameter.

I spent a whole day swapping between 4 blades and 5 blades.. Spinning in and out
It made no diff on my boat spinning in did the ct River run this year with the 32 s from b blades -2 sportmasters and 1" spacer

I guess I just needed reassurance that putting the spacers in is the right thing to do. At this point I just need to try it and see what happens.

One thing I know for sure is that I need more seat time.

I appreciate the input.

That is better speeds than what I see out of my 525's. Both engines are being completely rebuilt by Eddie Young now. and I'm hoping to see a little better performance. I have only been able to hit 4900 rpm so I called and spoke with BBlades and sent them my props. I'm currently running 4 blade props.

I'm running 4 blade bravo 1s by b blades however I lost 150 rpm by dropping 1" in the drive im turning about 5100. Always ran 5250 before just on the limiter . I'm done fooling with it . Runs good as is

That would be my goal.

Bill 3 I think I can help you 918-346-1476 Kevin

I am sure 38 pitch was directed at me. Meant 28 pitch.

Just re-reading this as I make my plan on what and how to change the setup.